105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Capstone Logistics LLC

Injured by object held or wielded by person · Cuts, lacerations, punctures without injury to internal structures

Federal OSHA recorded a severe workplace injury at Capstone Logistics LLC, 16 S Industrial Park Rd, MILTON, PENNSYLVANIA 17847 on — Cuts, lacerations, punctures without injury to internal structures, affecting the Arm(s) unspecified.

An employee was cutting corner boards off a pallet with a box cutter. The box cutter lacerated his arm.

Hospitalized Arm(s) unspecified Box cutters, razor knives

Capstone Logistics LLC

An employee was loading a trailer of automotive parts when the load caught the top of the trailer. He jumped up to clear a wedged item. When the item came down, the load collapsed onto the employee, resulting in a fractured pelvis.

Capstone Logistics LLC

An employee was performing maintenance on an a conveyor system. He was working to loosen the chain that moves the belt when his right index fingertip was caught by the chain and amputated.

Capstone Logistics LLC

An employee was walking on the dock when a forklift ran over their right foot. Their foot was crushed. The employee was taken hospitalized and required surgery.

Capstone Logistics, LLC

An employee was collecting pallets in the freezer when his foot slipped on condensation on the platform of the pallet jack and struck a post, resulting in a foot fracture.

Capstone Logistics, LLC

On May 24, 2024, an employee was operating a forklift and began to dismount when it pinned their left foot against a steel plate guard next to the charging station. The employee sustained a foot injury.

View Capstone Logistics LLC's full OSHA safety record →

Circle Graphics, Inc.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

Spellman High Voltage Electronics Corporation - Valhalla

An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.

CONTAINER GRAPHICS CORP

An employee was using a box cutter when it cut the tip of his left thumb resulting in a fingertip amputation.

Village Plumbing, Air & Electric

While working at a customer's residence, an employee was cutting tape with a box cutter to wrap insulation for a piece of pipe. The box cutter struck a hardened object within the wall causing it to bounce back and puncture the employee's right eye. The employee was hospitalized.

Rock Labor LLC

An employee was using the pipe-and-wrench method to loosen a seized bolt on a roof truss. A technician from another company was on the other side of the truss doing the same action with the same method. The employee's socket slipped off the bolt and his left hand was crushed against the truss, resulting in injuries to the index and little fingers, requiring hospitalization, surgery, and amputation of the index finger.

GXO Logistics

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

PVH, Corp.

A temporary employee was punched in the face by another temporary employee. He suffered a laceration to the eye.

Ace Hardware International LLC

An employee was backing up a powered industrial vehicle. Her left hand was caught between the vehicle and a rack, and the wrist was broken.

Agave Wire Ltd

An employee was operating an extruder and performing a spool swap over from the right spindle to the left spindle. After rewiring the new spool, the employee's clothing got caught in the turning shaft when the left spindle started back up. The employee's left arm was pulled into the machine, resulting in a fractured humerus and lacerations to her triceps. She was hospitalized and required surgery.

M&M Quality Solutions

An employee was resetting a warehouse racking system utilizing an order picker. They fell approximately 5 feet from the order picker to the concrete floor and sustained fractured ribs.

Main Line Clinical Labs

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

Ardent Mills

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

Zimmerman & Herr

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

McAneny Brothers, Inc.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

Metz Culinary Management LLC

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.