Struck by running powered equipment during maintenance, cleaning, testing · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Weyerhaeuser, 75 Sunset Dr, KALISPELL, MONTANA 59901
on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
During a maintenance day, two operators locked out the lathe to replace the trash gate cylinder. To complete the lockout, the lathe operator raised the trash gate to the pin position while another operator inserted a pin for the gate to rest on while the work is performed. When this event occurred, the lathe operator was in the cab, and the other operator was at the trash gate with the blocking pin. While inserting the pin, the gate rose from the run position to the pin position, pinching the injured employee's left middle finger and resulting in a fingertip amputation.
An employee was emptying a self-emptying trash dumpster. When the lever came down onto the track that guides the hopper into the dumping position, the employee sustained partial amputations to the right middle and index fingers.
An employee was climbing onto the outfeed roll case of a band mill. His left hand was on a 4-inch square tubing support beam as he stepped onto a bottom rail of the handrail. The handrail was attached to a set of steps, which tilted up. His left ring finger was smashed between the handrail and the square tubing. His fingertip was amputated.
An employee was operating a three-wheeled personal electric transport vehicle. While traveling up a concrete grade of approximately 30 degrees, the equipment failed. The employee then attempted to turn left, back down the incline, and the front wheel may have caught on a concrete barrier. The employee fell out of the vehicle, landed on the concrete ground and sustained a broken left femur.
As an employee was walking to his work station, he saw two boards misaligned on the green trimmer conveyor belt. When he reached to align the boards his left pinky finger was jammed between the conveyor belt wall and the boards. His left pinky fingertip was surgically amputated.
On April 16, 2019, an employee was using a staple gun to secure paper to a bundle of completed product to a line roller system. The bundle moved and the employee's finger was pinched between the product and a roller, resulting in a partial amputation of the right middle finger.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 321113)
An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.
An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.
An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.
While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.
An employee was fixing an issue with seed cleaning equipment when he slipped on the ladder he was on. He went to catch himself and his hand went into a moving belt and pulley on the cleaner. The employee sustained the amputation of his right middle and index fingertips just below the fingernails.
An employee was riding an all-terrain vehicle (ATV) to move a bison herd. He was riding up the side of a steep hill when the ATV struck a rock and rolled, ejecting the employee before rolling over him. The employee suffered broken vertebrae in his back that required hospitalization.
An employee was climbing in the spreader area to remove a pasta jam when his right little finger was cut by the rotary cut-off knife. The employee sustained a laceration and fracture, resulting in an amputation.
A smoke jumper parachuted out of a helicopter during a forest fire response, landed on steep rugged terrain, and suffered femur and rib fractures and a liver laceration. The employee was hospitalized.