F.W. Webb Company

An employee tripped and stumbled into an aisle end cap in a warehouse. He fell to the ground and suffered lacerations to the face, chin, hand, and right forearm. He was hospitalized.

An employee was operating a powered pallet jack and stepped off while it was coming to a stop. They became caught between the pallet jack and a pole. The employee was hospitalized with a fractured foot.

An employee was making a delivery to a customer and fell on the ground while unloading his truck. The employee was hospitalized with a brain bleed, a dislocated shoulder, and a fractured left thumb.

An employee was roll grooving an 8-inch diameter pipe when their glove was caught in the grooving wheels. The employee's fingertip was amputated.

An employee was delivering a pallet of goods to a loading dock door using a powered stand-on pallet jack. His left big toe was crushed between a protective post at the edge of the door and the pallet jack. The toe was partially amputated.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.

An employee lost his footing while climbing an inclined ladder. He stumbled down one step and was able to stabilize himself by holding the railing and twisting his body, but he suffered an internal abdominal injury and was hospitalized.

A delivery driver was delivering supplies. He fell off his flatbed truck and struck his head. He was hospitalized.

Equipment was being brought back online after a break-in and vandalism. An arc flash occurred when an employee cycled a 480-volt circuit breaker. The employee suffered burns to the face and hands.

An employee was unloading an 8-inch ducting pipe when the pipe rolled and crushed their legs. The employee sustained fractures to both ankle.

An employee was moving loads with a forklift when their forklift struck another forklift. One of the forklifts was traveling in reverse. The employee sustained a fractured ankle.

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.

An employee was using a metal shear when it amputated the tip of his right index finger.

An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.

An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.