E.R. Snell Contractor, Inc.

On October 10, 2024, an employee was using a nine-tire roller machine to roll out dirt with wet/powdered concrete. The machine started sliding on an incline. When the employee reversed, the back tires spun and the machine slid off a 1- to 1.5-foot dirt edge. The employee suffered injuries to the left wrist and hip and was hospitalized.

An employee was opening the valve for the liquid asphalt hauler to make a delivery. The valve was opened from the storage tank that gravity fed the hanging hose for loading trucks. Liquid asphalt sprayed into the air, burning the employee on the left forearm, face, and ear.

An employee was cutting an 18-inch concrete pipe using a concrete saw. He was almost finished cutting it when the concrete saw locked in the cut, causing it to swing back and lacerate his jaw.

The injured employee was assisting another employee with fueling a push boat when fumes/vapors in the area were ignited by a spark from the battery post. The injured employee sustained flash burns.

After a concrete bucket was filled from a chute, the chute was raised up and crushed the left little finger of the employee who had been filling the bucket. The employee suffered an amputation to the finger.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.

An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.

An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.

An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.

An employee tripped while stepping over a hose, fell on the ground, and dislocated his shoulder. He was hospitalized.

On July 30, 2025, an employee was utilizing a circular saw to cut plastic into strips that would be used as shims. The blade of the saw amputated his left little finger to the second knuckle.

An employee was working on the ingot loader of a aluminum processing machine and noticed a pin was not installed. The employee reached to retrieve the pin and the machine activated for a functions test. The machine closed on the employee's hand, resulting in a hand injury requiring hospitalization.

An employee was changing two transition hoppers at a silo. The employee started having leg cramps and felt light-headed. After taking two breaks, the employee lost consciousness. The employee was hospitalized with heat stress.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.