Struck by running powered equipment during maintenance, cleaning, testing · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Ameristar Perimeter Security USA Inc, 1555 N Mingo Rd, TULSA, OKLAHOMA 74116
on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
An employee was adjusting the rollers on the mill feeder when their right thumb was crushed between two rollers, resulting in amputation of the thumb tip.
Amputation Finger or thumb tip(s), nail(s) Rolling mills, rolling, calendering machinery
More severe injuries at Ameristar Perimeter Security USA Inc
Two employees were removing racks of painted parts from a conveyor belt and putting them on a dolly. The injured employee had his left hand on the upright of the dolly when the other employee dropped his end of the rack. The injured employee's left ring finger was caught between the rack and the dolly, resulting in a fingertip amputation.
An employee was removing a piece of scrap metal from a machine and they were struck in the upper left chest with a fence pole, causing a puncture wound and two fractured ribs.
An employee was changing the die on a 100-ton stamping press. As he was pushing the new die into place, his left middle fingertip was caught between the die and the die housing. He suffered a partial amputation to the fingertip.
Employee was operating a roll mill swedger. He was pushing on a slide bar when he placed his right hand on the moving equipment, severely crushing his middle finger. He was taken to the hospital where the tip of his right middle finger was amputated at the first joint.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 332323)
A temporary employee was performing a two-person projection welding task to add a hinge reinforcement to a hollow steel door. He was positioning the hinge reinforcement while his supervisor held the door to maintain alignment. When the foot pedal was actuated, the electrode partially amputated the employee's left ring finger.
An employee was stacking bundles (12 feet long, 21 inches high) of aluminum extrusions (weighing 28 pounds each). After three bundles had been successfully stacked, the fourth tipped over when it was partially complete. It landed on the employee's right ankle/leg and broke the tibia. The employee was hospitalized.
An employee was operating a core drill to bore through concrete at an active construction site. The equipment struck embedded rebar in the concrete, causing the handle to kick back and strike the employee's ribs. The employee was hospitalized with a fractured rib and a punctured lung.
An employee was loading pallets onto a truck and climbed down off a pallet after loosening straps to release the crane. The employee slipped off the flatbed truck and fell 4 feet to the dock plate/ground. The employee was hospitalized with a brain bleed and fractures to their T4, T5, and T6 vertebrae.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.