Associated Wholesale Grocers Inc.

A stack of items on a pallet jack was being moved through a trailer door. The top of the stack struck the door causing the door to fall onto an employee. The employee suffered broken ribs and torso contusions.

An employee was opening a roll-up door when his glove was caught in the door's rope, resulting in a partial amputation to his right index fingertip.

An employee was pulling products from a storage rack when a damaged cardboard box collapsed, causing a pallet full of product to fall approximately 15 feet. The 700-pound pallet struck the left side of the employee's body, resulting in an injury to the left shoulder and hip.

An employee was backing up a stand-on pallet jack. The employee's right foot and toes were caught and injured between the pallet jack and a parked one.

An employee was driving an electric pallet jack when he fell to the ground, suffering a contusion to the back of the head. He was hospitalized.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.

An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.

An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was making a delivery in a truck. As he exited the truck, he fell on a step and then to the ground, resulting in a fractured tibia.

An employee was picking items from the freezer section of the warehouse. When he stepped down onto the floor, he turned on the planted foot, and felt a "pop" and pain in his knee. The employee was hospitalized with a dislocated knee and two torn tendons. He required surgery to repair the tendons.

An employee was operating an electric pallet jack when it pinned his right ankle against some racking. The ankle was broken and he was hospitalized.

At 7:40 a.m. on October 3, 2025, an employee was unloading a bulkhead at a dock door. As he pulled the bulkhead out of a trailer, its plastic lip caught on the dock plate, causing the employee to fall and twist his left leg, knee, and hip. The hip was broken and he was hospitalized, requiring surgery.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.