Exposure through intact tissue · Chemical burns, corrosions degree unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at WMC - Industrial Wire LLC, 1915 John Connally Drive, CARROLLTON, TEXAS 75006
on — Chemical burns, corrosions degree unspecified, affecting the Upper and lower extremities n.e.c..
Final narrative
An employee was changing a section of pipe on a sulfuric acid tank when the pipe broke and acid splashed onto the left side of the employee's body, resulting in chemical burns to their left shoulder, the back of his arm, and his leg.
Hospitalized Upper and lower extremities n.e.c. Sulfuric acid
An employee was removing a hose from a chemical tank after filling the tank with hexamethylenediamine (HMD). He checked the line to ensure that the hose was clear, then disconnected the hose at the connection. Residual chemical sprayed onto his face, causing a second-degree burn. He was hospitalized.
A shipping/receiving operator was working on a loading rack, loading a railcar. A 2-inch discharge cap failed and released pressure along with sulfuric acid from the railcar. The acid sprayed onto the employee, who suffered burns to the chest and the lower facial area. The employee was hospitalized.
An employee was pressure washing truck scales when they were splashed with water and an unknown chemical on their leg and immediately experienced a burning sensation. The employee was hospitalized with a chemical burn and required surgery.
An employee was on a ladder disconnecting a 1-inch hose, known to have last carried acrylic acid that had been drained. When the hose was disconnected, residual acid dripped onto the employee's shoulder/arm area, causing a second-degree chemical burn.
Employees were removing scaffolding that was used to repair an ion exchange tank. The line was undergoing the regen process when a piece of scaffold struck a PVC pipe that transported hydrochloric acid (HCl). The injured employee was placing material inside a scaffold rack when he was sprayed in the face with HCl and sustained chemical burns to his eyes, face, chest, right arm, and left leg.
More severe injuries in this industry (NAICS 331222)
On August 1, 2025, at approximately 5:05 AM, an employee was applying a label to a spool of product on a crane when the employee s arm became caught between two points of the crane. The employee was hospitalized with a degloving/avulsion injury to their right arm.
An employee was making an adjustment to a machine when his finger got caught in the machine. He sustained a partial amputation to the fifth finger on his left hand.
An employee was working on a wire drawing machine when three fingers on their right hand were caught between the rolls with the wire intact. The employee sustained an amputation to the middle and ring fingers and was hospitalized.
An employee was working at a threader machine. A spindle caught her sweatshirt. She was pulled into the machine, which pulled off her hooded sweatshirt and pulled in her hair. She suffered a scalping and was hospitalized.
An employee was cleaning out a glass beaker before going along the process line to check on various processes. While walking along the process line, the employee fell to the floor. The employee was hospitalized with three fractures to her left leg and foot requiring surgery.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.