105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Huhtamaki Inc

Struck by dislodged or detached object(s) · Traumatic injuries or exposures unspecified

Federal OSHA recorded a severe workplace injury at Huhtamaki Inc, 608 Mathis Mill Rd, ALBERTVILLE, ALABAMA 35951 on — Traumatic injuries or exposures unspecified, affecting the Forearm(s).

An employee was removing a step cam by with a sledgehammer when a piece of the cam broke off, fell, and struck his right forearm.

Hospitalized Forearm(s) Vehicle and machine parts unspecified

Huhtamaki, Inc.

An employee was folding scrap paper wrap. The employee placed the paper on the floor and folded it over before stepping on the paper to flatten it. When they stepped on the paper, they slipped and fell to the floor, twisting their right ankle. The employee was hospitalized with a broken ankle that required surgery.

Huhtamaki, Inc.

An employee was troubleshooting a broken belt on a beveling machine when his left index finger was caught in a partially guarded chain and sprocket mechanism, resulting in a partial fingertip amputation just below the fingernail.

Huhtamaki, Inc.

An employee was watching maintenance employees remove a roller from a forming shaft when a piece of steel broke off and impaled the employee in the abdomen.

Huhtamaki, Inc.

An employee was working in a cup production area, performing heavy work in a hot area when they began to experience stomach cramps and vision loss. The employee was hospitalized for heat-related illness.

Huhtamaki, Inc.

While troubleshooting a jam in a laminator machine, the machine cycled and an employee's hand was caught and crushed in the machine, resulting in surgery and hospitalization.

View Huhtamaki Inc's full OSHA safety record →

NATIONAL MILL MAINTENANCE, LLC

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

C. Miller Drilling Inc

A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.

Rolling Frito-Lay Sales, LP

An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.

Blackburn's Fabrication, Inc.

An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.

Textron Aviation Inc. (Orlando Service Center)

A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.

Yazoo Mills, Incorporated

An employee had just spliced a new roll to the paper being fed into a winder machine. The employee realized the splice would not hold and was working to correct it when their right hand was caught between the winder head and a belt. The employee suffered broken fingers. The incident took place during a training activity.

International Paper Co

An employee was repairing the locking mechanism on a machine when their right index finger was partially amputated.

New WinCup Holdings, Inc.

An employee was clearing a jam on the cup production line when a blade caused a laceration and a partial amputation to their left middle finger.

ASPEN PRODUCTS INC

An employee was cleaning the rollers of a press machine when their glove got caught in a roller. The employee sustained an amputation to their right ring finger and their right middle finger was fractured.

Sysco Gulf Coast, LLC

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

Norflex, Inc.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

Ampler Pizza II LLC

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

Birdsong Corporation

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

Pilgrims

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.