CHICAGO, IL —
OSHA Inspection: DRUMMOND INDUSTRIES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DRUMMOND INDUSTRIES, INC. in 2616 N. CICERO, CHICAGO, IL 60639 (NAICS 326199). OSHA activity number 311163067.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DRUMMOND INDUSTRIES, INC.
- Site address
- 2616 N. CICERO
- City
- CHICAGO
- State
- IL
- ZIP
- 60639
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- SIC code (legacy)
- 3089
- Employees
- 20
- Ownership type
- A
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 13, 2007
- Abate by
- Aug 15, 2007
- Penalty
- Initial $750 · Current $440 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to laceration/amputation hazards from rotating saw blade: (a) Tool Room- Provision was not made to prevent the Carolina horizontal band saw from automatically restarting upon restoration of power after a power source failure. Among others methods, one feasible and acceptable means of abatement in an event of interruption in the electrical supply to the saw would be to provide an electrical device that is designed to prevent the saw from restarting automatically when power is restored, such as a magnetic restart or similar device as prescribed by the American National Standard Institute for Metal Sawing Machines, ANSI B11.10-2003, Section 6.11. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $440.00
- — Z (S) $750.00
1910.212 A01
- Issued
- Jul 13, 2007
- Abate by
- Aug 15, 2007
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.147 C01
- Issued
- Jul 13, 2007
- Abate by
- Aug 15, 2007
- Penalty
- Initial $600 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $600.00
1910.178 L04 I
- Issued
- Jul 13, 2007
- Abate by
- Aug 15, 2007
- Penalty
- Initial $600 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $600.00
1910.178 L06
- Issued
- Jul 13, 2007
- Abate by
- Aug 15, 2007
Recent events (2)
- — I (S)
- — Z (S)
1910.242 B
- Issued
- Jul 13, 2007
- Abate by
- Jul 18, 2007
- Penalty
- Initial $450 · Current $270 Reduced
Recent events (2)
- — I (S) $270.00
- — Z (S) $450.00
1910.303 G01 II
- Issued
- Jul 13, 2007
- Abate by
- Aug 15, 2007
- Penalty
- Initial $450 · Current $270 Reduced
Recent events (2)
- — I (S) $270.00
- — Z (S) $450.00
1910.305 G02 I
- Issued
- Jul 13, 2007
- Abate by
- Jul 18, 2007
- Penalty
- Initial $450 · Current $270 Reduced
Recent events (2)
- — I (S) $270.00
- — Z (S) $450.00
1904.29 A
- Issued
- Jul 13, 2007
- Abate by
- Aug 15, 2007
Recent events (2)
- — I (O)
- — Z (O)
1910.157 C01
- Issued
- Jul 13, 2007
- Abate by
- Jul 25, 2007
Recent events (2)
- — I (O)
- — Z (O)
More inspections in this industry (NAICS 326199)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311163067.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.