OSHA Inspection: SAILING SPECIALTIES INC

Issued

2012-06-11 00:00:00

Abate by

2012-06-19 00:00:00

Penalty

Initial $1600.00 · Current $1600.00

Issued

2012-06-11 00:00:00

Abate by

2012-06-19 00:00:00

Penalty

Initial $1000.00 · Current $1000.00

Issued

2012-06-11 00:00:00

Abate by

2012-06-14 00:00:00

Penalty

Initial $800.00 · Current $800.00

Issued

2012-06-11 00:00:00

Abate by

2012-06-14 00:00:00

Issued

2012-06-11 00:00:00

Abate by

2012-06-14 00:00:00

Penalty

Initial $700.00 · Current $700.00

Issued

2012-06-11 00:00:00

Abate by

2012-06-19 00:00:00

Penalty

Initial $1600.00 · Current $1600.00

General-duty citation text

Labor and Employment Article, Section 5-104(a): The employer did not
furnish employment and a place of
employment which were free from recognized hazards that were causing or
likely to cause death or serious
physical harm to employees:
(a)Date of Violation:On or About 05/01/12
Location:Production Shop
Condition:Employees were exposed to crushed/struck-by hazards from
collapsing steel storage
racks that were accessed by a forklift and were not secured to the floor.
Among other methods, one feasible and acceptable abatement method to
correct this hazard is to comply with
ANSI MH16.1:2008, 1.4.7 Specification for the Design, Testing, and
Utilization of Industrial Racks.
Abatement documentation (photographs, receipts, copies of programs,
training certification, etc.)
is required for this item.

Issued

2012-06-11 00:00:00

Abate by

2012-06-11 00:00:00

Penalty

Initial $1600.00 · Current $1600.00

General-duty citation text

Labor and Employment Article, Section 5-104(a): The employer did not
furnish employment and a place of
employment which were free from recognized hazards that were causing or
likely to cause death or serious
physical harm to employees:
(a)Date of Violation:05/01/12
Location:Production Shop
Equipment:Clark Equipment Battery Powered Forklift, Model #TW20B, Serial
#TW-20-329-
42TC-A679
Condition:A battery powered forklift was not equipped with a seatbelt.
(b)Date of Violation:05/01/12
Location:Production Shop
Equipment:Crown Battery Powered Forklift, Model #25SCTT, Serial #W-15524
Condition:A battery powered forklift was not equipped with a seatbelt.
Among other methods, one feasible and acceptable method to correct this
hazard, install and utilize a restraint
system in accordance with the current version of American National
Standards Institute (ANSI) B56.1, "Safety
Standard for Powered Industrial Trucks," and American Society of
Mechanical Engineers (ASME) B56.1-
2000, "Safety Standard for Low Lift and High Lift Trucks."

Issued

2012-06-11 00:00:00

Abate by

2012-06-11 00:00:00

Issued

2012-06-11 00:00:00

Abate by

2012-06-19 00:00:00

Issued

2012-06-11 00:00:00

Abate by

2012-06-14 00:00:00

Issued

2012-06-11 00:00:00

Abate by

2012-06-14 00:00:00

Issued

2012-06-11 00:00:00

Abate by

2012-07-05 00:00:00