EXCELSIOR SPRINGS, MO —
OSHA Inspection: ROBERT BOSCH TOOL CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ROBERT BOSCH TOOL CORPORATION in 140 CORUM ROAD, EXCELSIOR SPRINGS, MO 64024 (NAICS 326220). OSHA activity number 335407383.
Where did this inspection happen?
- Establishment
- ROBERT BOSCH TOOL CORPORATION
- Site address
- 140 CORUM ROAD
- City
- EXCELSIOR SPRINGS
- State
- MO
- ZIP
- 64024
- Mailing
- 140 CORUM ROAD, EXCELSIOR SPRINGS, MO 64024
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326220
- Employees
- 264
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.132 D01 I
- Issued
- Abate by
- Penalty
- Initial $5100.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.132(d)(1)(i): Select, and have each affected employee use, the types of PPE that will protect the affected employee from the hazards identified in the hazard assessment; (a) On or about 25 July 2012, in the pelletizer area, employees were removing the excess hot plastic without gloves to prevent possible burns.
Recent events (2)
- — I (S) $0
- — Z (S) $5100
1910.169 B03 III
- Issued
- Abate by
- Penalty
- Initial $5100.00 · Current $0.00 Reduced
General-duty citation text
1910.169(b)(3)(iii) Safety appliances, such as safety valves, indicating devices and controlling devices, were not constructed, located, or installed so that they cannot be readily rendered inoperative by any means, including the elements. (a) On or about 25 July 2012 observed employees in the coiler section operate machinery with broken pressure gauges.
Recent events (2)
- — I (S) $0
- — Z (S) $5100
1910.303 B07 IV
- Issued
- Abate by
- Penalty
- Initial $6300.00 · Current $100.00 Reduced
General-duty citation text
1910.303(b)(7)(iv) There shall be no damaged parts that may adversely affect safe operation or mechanical strength of the equipment, such as parts that are broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating. (a) On or about 25 July 2012. Observed employees in pelletizer section were exposed to electrical wires on power cords. The wires are on the pelletizer screen door which employees use continuously.
Recent events (2)
- — I (O) $100
- — Z (S) $6300
1910.303 F02
- Issued
- Abate by
- Penalty
- Initial $4250.00 · Current $100.00 Reduced
General-duty citation text
1910.303(f)(2) Services, feeders, and branch circuits. Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, shall be legibly marked to indicate its purpose, unless located and arranged so the purpose is evident. (a) On or about 25 July 2012, observed employees exposed to electrical hazards due to electrical panels not being properly labeled or listed.
Recent events (2)
- — I (O) $100
- — Z (S) $4250
More inspections at ROBERT BOSCH TOOL CORPORATION
EXCELSIOR SPRINGS, MO—2014-07-22 00:00:00
ROBERT BOSCH TOOL CORPORATION
View ROBERT BOSCH TOOL CORPORATION's full OSHA safety record →
More inspections in this industry (NAICS 326220)
TACOMA, WA—2026-06-25
WA317991827 - PEXCO LLC
FOREST CITY, NC—2026-06-03
161301 - DANFOSS POWER SOLUTIONS II, LLC
FORT WORTH, TX—2026-04-22
ATCO RUBBER PRODUCTS, INC.
OTTAWA, IL—2026-04-15
MBL (USA) CORPORATION
LEXINGTON, TN—2026-04-02
FLUID ROUTING SOLUTIONS, LLC
More inspections in MO
KANSAS CITY, MO—2026-07-09
NIAGARA BOTTLING
MONETT, MO—2026-07-09
MONETT METALS INC.
PARKVILLE, MO—2026-07-08
SKY-TECH ROOFING, LLC.
SPRINGFIELD, MO—2026-07-07
D & C CONSTRUCTION, LLC.
JOPLIN, MO—2026-07-07
SERVICE RECYCLING - NORTH PLANT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335407383.