Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: GULF MANUFACTURING INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of GULF MANUFACTURING INC. in 645 CROMWELL AVE. P.O. BOX 430, ROCKY HILL, CT 06067 (NAICS 332312). OSHA activity number 337042584.

Watch Gulf Manufacturing INC. — free Get an email when a new federal OSHA severe-injury report for Gulf Manufacturing INC. is published. One employer, no account, unsubscribe in one click.
Site address
645 CROMWELL AVE. P.O. BOX 430
City
ROCKY HILL
State
CT
ZIP
06067
Mailing
645 CROMWELL AVE. P.O. BOX 430, ROCKY HILL, CT 06067
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
14
Ownership type
A

7 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1080.00 · Current $648.00 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):        645 Cromwell Ave., Rocky Hill, CT, Facility: On or about 10/22/2012 the employer did not establish a fork truck Training program. An employee was driving a forklift without being trained by the employer.
Recent events (2)
  • — I (S) $648
  • — Z (S) $1080

1910.184 I01

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2520.00 · Current $1512.00 Reduced
29 CFR 1910.184(i)(1): Synthetic web sling(s) were not marked or coded to show rated capacities for each type of hitch and type of synthetic web material:         645 Cromwell Ave., Rocky Hill, CT.: Fabrication area: On or about 10/22/2012 synthetic web slings were not marked to show rated capacity.
Recent events (2)
  • — I (S) $1512
  • — Z (S) $2520

1910.215 A04

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2160.00 · Current $1296.00 Reduced
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch      645 Cromwell Ave., Rocky Hill, CT., Production area: On or about 10/22/2012 the employer did not ensure that the work rest on the Continantal International bench grinder was adjusted to one eighth inch.
Recent events (2)
  • — I (S) $1296
  • — Z (S) $2160

1910.242 B

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1800.00 · Current $1080.00 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:       645 Cromwell Ave., Rocky Hill, CT., Facility: On or about 10/22/2012 the employer did not ensure that compressed air used for cleaning purposes was reduced to 30 p.s.i.
Recent events (2)
  • — I (S) $1080
  • — Z (S) $1800

1910.253 B04 III

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $1800.00 · Current $1080.00 Reduced
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet:        645 Cromwell Ave., Rocky Hill, CT: Outside storage building: On or about 10/22/2012 the employer was storing Oxygen cylinders and acetylene cylinders next to each other.
Recent events (2)
  • — I (S) $1080
  • — Z (S) $1800

1910.304 G05

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1440.00 · Current $864.00 Reduced
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective:         645 Cromwell Ave., Rocky Hill, CT. fabrication area: On or about 10/22/2012 the pedestal industrial fan plug was missing the ground pin.
Recent events (2)
  • — I (S) $864
  • — Z (S) $1440

1910.305 B01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1800.00 · Current $1080.00 Reduced
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:           645 Cromwell Ave., Rocky Hill, CT: Fabrication Area: On or about 10/22/2012 the electrical panel near the exit door was missing two circuit breakers and the two openings were not provided with covers exposing.
Recent events (2)
  • — I (S) $1080
  • — Z (S) $1800

View GULF MANUFACTURING INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337042584.