OSHA Inspection: WILSON WELDING SERVICE, INC.

Issued

2013-03-20 00:00:00

Abate by

2013-04-19 00:00:00

Penalty

Initial $3080.00 · Current $3080.00

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section    On or about 01/22/2013 at 2939 Snap Finger Road Decatur, GA; specific energy control procedure were not developed where employees performed maintenance on machinery that included but was not limited to: shears, ironworker, and pressbreak which have multiple energy sources that include hydraulic, mechanical, and electrical.

Issued

2013-03-20 00:00:00

Abate by

2013-04-19 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees:    On or about 01/22/2013 at 2939 Snap Finger Road Decatur, GA; the employer did not provide lock-out tag-out training to employees the were required to perform maintenance on machinery that included but was not limited to: shears, ironworker, and pressbreak which had multiple energy sources, the employer did not provide lockout/ tagout training.

Issued

2013-03-20 00:00:00

Abate by

2013-04-19 00:00:00

Penalty

Initial $2200.00 · Current $2200.00

General-duty citation text

29 CFR 1910.147(c)(5)(ii): Lockout devices and tagout devices were not singularly identified:    On or about 01/22/2013 at 2939 Snap Finger Road Decatur, GA; the employer had four locks that were used for lockout/ tagout purposes and one key was used to open all four locks instead of four separate keys instead of being keyed differently.

Issued

2013-03-20 00:00:00

Penalty

Initial $1122.00 · Current $1122.00

General-duty citation text

29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly:    On or about 01/22/2013 at 2939 Snap Finger Road Decatur, Ga; an overcharged fire extinguisherhad not been inspected since 11/21/2012.

Issued

2013-03-20 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check:    On or about 01/22/2013 at 2939 Snap Finger Road Decatur, Ga; where employees are required to fight incipient level fires the employer had not performed an annual inspection of the portable fire extinguishers since 07/25/2011.

Issued

2013-03-20 00:00:00

Abate by

2013-03-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.253(b)(2)(iv): Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use:    On or about 01/22/2013 at 2939 Snap Finger Road Decatur, Ga; compressed gas cylinders located in the shop were not capped.