SALEM, AL —
OSHA Inspection: CHEROKEE FABRICATION COMPANY, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CHEROKEE FABRICATION COMPANY, INC in 13244 US HIGHWAY 280E, SALEM, AL 36874 (NAICS 333249). OSHA activity number 338906423.
Where did this inspection happen?
- Establishment
- CHEROKEE FABRICATION COMPANY, INC
- Site address
- 13244 US HIGHWAY 280E
- City
- SALEM
- State
- AL
- ZIP
- 36874
- Mailing
- 13244 US HIGHWAY 280E, SALEM, AL 36874
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333249
- Employees
- 40
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $1750.00 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by and crush hazards: a) At Cherokee Fabrication: On or about February 11, 2013 and at times prior; the employer failed to require and enforce the use of seatbelts for all employees operating forklifts on site exposing them to struck-by and crush hazards from being thrown from forklift.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.215 A04
- Issued
- Abate by
- Penalty
- Initial $2380.00 · Current $1190.00 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: a) At Cherokee Fabriction: On or about February 11, 2013 and at times prior; the employer exposed his employees to struck-by hazards in the he failed to ensure a Daytona bench grinder used by employees had workrests installed.
Recent events (2)
- — I (S) $1190
- — Z (S) $2380
1910.215 B09
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: a) At Cherokee Fabrication: On or about February 11, 2013 and at times prior; the employer failed to ensure a Daytona bench grinder used by employees was equipped with adjustable tongue guards exposing employees to struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Abate by
- Penalty
- Initial $2100.00 · Current $1050.00 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) At Cherokee Fabrication: On or about February 11, 2013 and at times prior; the employer exposed his employees to hazardous chemicals and substances includeing but not limted to oxygen, carbon dioxide, petroleum gas, propane, nitroge, and acetylene used in daily work activities without maintianing a written hazard communication program as required by the standard.
Recent events (2)
- — I (S) $1050
- — Z (S) $2100
1910.1200 H01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) At Cherokee Fabrication: On or about February 11, 2013 and at times prior; the employer exposed his employees to hazardous chemicals in that employees were allowed to use hazardous chemicals in thier work areas without first being provided information and training on those hazardous chemicals including but not limted to oxygen, carbon dioxide, petroleum gas, propane, nitroge, and acetylene.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L04 III
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) At Cherokee Fabrication: On or about February 1, 2013 and at times prior; the employer exposed his employees to struck-by hazards in that employees were allowed to operate a powered industrial truck without the employer ensuring that the operators had received the required re-evaluation at least every three years as specified in the regulation.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at CHEROKEE FABRICATION COMPANY, INC
MEMPHIS, TN—2008-10-15 00:00:00
CHEROKEE FABRICATION COMPANY INC
View CHEROKEE FABRICATION COMPANY, INC's full OSHA safety record →
More inspections in this industry (NAICS 333249)
NORTON SHORES, MI—2026-06-30
I D SYSTEMS INC DBA INTER DYNE SYSTEMS
SAINT LOUIS, MO—2026-06-23
WEIR MINERALS LEWIS PUMPS
AUBURN HILLS, MI—2026-06-10
ANDROID INDUSTRIES LLC
EGG HARBOR TOWNSHIP, NJ—2026-06-09
JOMAR CORPORATION
BUTTE, MT—2026-05-27
RESODYN CORPORATION
More inspections in AL
CLANTON, AL—2026-07-13
UBIQUE TECHNOLOGIES, INC.
IRONDALE, AL—2026-07-13
FATHER NATURE LANDSCAPES OF BIRMINGHAM, INC.
GARDENDALE, AL—2026-07-09
ANDINO'S IRON WORKERS, LLC
CULLMAN, AL—2026-07-09
ALFREDO PICHARDO BLANCO
MOBILE, AL—2026-07-09
FLEXICREW TECHNICAL, LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338906423.