NEW ORLEANS, LA —
OSHA Inspection: BAKER PILE DRIVING AND SITE WORK, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BAKER PILE DRIVING AND SITE WORK, LLC in 6823 ST. CHARLES AVE., NEW ORLEANS, LA 70118 (NAICS 238910). OSHA activity number 338953458.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BAKER PILE DRIVING AND SITE WORK, LLC
- Site address
- 6823 ST. CHARLES AVE.
- City
- NEW ORLEANS
- State
- LA
- ZIP
- 70118
- Mailing
- 1051 RONALD REAGAN HWY., COVINGTON, LA 70433
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238910
- Employees
- 15
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.1412 D01 XIV
- Issued
- May 24, 2013
- Abate by
- May 24, 2013
- Penalty
- Initial $1,870 · Current $550 Reduced
General-duty citation text
29 CFR 1926.1412(d)(1)(xiv): Safety devices and operational aids for proper operation. a) On or about March 13, 2013; at the center of the jobsite, the employer allowed employees to operate and work near a mobile crane (Sumitomo LS-118, S/N-LS118-0723) without ensuring that safety devices (horn) were checked for proper operation during the shift inspection.
Recent events (2)
- — I (S) $550
- — Z (S) $1870
1926.1415 B
- Issued
- May 24, 2013
- Abate by
- May 24, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1415(b): Proper operation required. Operations must not begin unless all of the devices listed in this section are in proper working order. If a device stops working properly during operations, the operator must safely stop operations. If any of the devices listed in this section are not in proper working order, the equipment must be taken out of service and operations must not resume until the device is again working properly. See �� 1926.1417 (Operation). Alternative measures are not permitted to be used. [75 FR 48150, August 9, 2010] a) On or about March 13, 2013; at the center of the jobsite, the employer allowed employees to operate and work near a mobile crane (Sumitomo LS-118, S/N-LS118-0723) without ensuring that crane horn was in proper working order.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1412 F02 XVII
- Issued
- May 24, 2013
- Abate by
- Jun 9, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.1412(f)(2)(xvii): Warning labels and decals originally supplied with the equipment by the manufacturer or otherwise required under this standard: Missing or unreadable. a) On or about March 13, 2013; at the center of the jobsite, the employer allowed employees to operate and work near a mobile crane (Sumitomo LS-118, S/N-LS118-0723) without ensuring that the warning decals (swing radius warning) originally supplied with the equipment by the manufacturer were affixed to the crane and readable.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1926.1407 G
- Issued
- May 24, 2013
- Abate by
- Jun 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1407(g): Posting of electrocution warnings. There must be at least one electrocution hazard warning conspicuously posted in the cab so that it is in view of the operator and (except for overhead gantry and tower cranes) at least two on the outside of the equipment. [75 FR 48142, August 9, 2010] a) On or about March 13, 2013; at the center of the jobsite, the employer allowed employees to operate and work near a mobile crane (Sumitomo LS-118, S/N-LS118-0723) without ensuring that at least two electrocution hazard warnings were posted on the outside of the crane.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1417 C01
- Issued
- May 24, 2013
- Abate by
- Jun 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1417(c)(1): The procedures applicable to the operation of the equipment, including rated capacities (load charts), recommended operating speeds, special hazard warnings, instructions, and operator's manual, must be readily available in the cab at all times for use by the operator. a) On or about March 13, 2013; at the center of the jobsite, the employer allowed employees to operate and work near a mobile crane (Sumitomo LS-118, S/N-LS118-0723) without ensuring that a operators manual (printed in a language the operator can read) was maintained readily available in the cab at all times for use by the operator.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Baker Pile Driving and Site Work, LLC
View Baker Pile Driving and Site Work, LLC's full OSHA safety record →
More inspections in this industry (NAICS 238910)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338953458.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.