BATH, ME —
OSHA Inspection: LANGFORD & LOW INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of LANGFORD & LOW INC. in 175 CONGRESS AVENUE, BATH, ME 04530 (NAICS 236220). OSHA activity number 339110850.
Where did this inspection happen?
- Establishment
- LANGFORD & LOW INC.
- Site address
- 175 CONGRESS AVENUE
- City
- BATH
- State
- ME
- ZIP
- 04530
- Mailing
- P.O. BOX 662, PORTLAND, ME 04104
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 2
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.304 F
- Issued
- Abate by
- Penalty
- Initial $5390.00 · Current $2600.00 Reduced
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed ripsaws were not guarded by an automatically adjusting hood which completely encloses that portion of the saw above the table and above the material being cut: At the Jobsite - The 8 inch Ridgid table saw was not provided with a hood guard.
Recent events (2)
- — I (S) $2600
- — Z (S) $5390
1926.304 F
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws were not equipped with a spreader to prevent material from squeezing the saw or being thrown back on the operator: At the Jobiste - The 8 inch Ridgid table saw was not provided with a spreader.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.304 F
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws did not have non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: At the Jobsite - The 8 inch Ridgid table saw was not proviided with non-kickback fingers.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at LANGFORD & LOW INC.
AUBURN, ME—2015-04-02 00:00:00
LANGFORD & LOW, INC.
SOUTH PORTLAND, ME—2013-06-27 00:00:00
LANGFORD & LOW INC.
BATH, ME—2013-03-15 00:00:00
LANGFORD & LOW INC.
WATERVILLE, ME—2011-07-26 00:00:00
LANGFORD & LOW INC.
SCARBOROUGH, ME—2011-07-25 00:00:00
LANGFORD & LOW INC.
View LANGFORD & LOW INC.'s full OSHA safety record →
More inspections in this industry (NAICS 236220)
NEWPORT BEACH, CA—2026-07-16 00:00:00
KPRS CONSTRUCTION SERVICES, INC.
CHANDLER, AZ—2026-07-16 00:00:00
SUN STATE BUILDERS
ROCHESTER HILLS, MI—2026-07-16 00:00:00
ICON RESTORATION SERVICES
WAUSAU, WI—2026-07-16 00:00:00
MIRON CONSTRUCTION CO. INC.
PONCE, PR—2026-07-15 00:00:00
FC CONSTRUCTION LLC
More inspections in ME
AUGUSTA, ME—2026-07-14 00:00:00
JJ GONZALEZ ROOFING AND GUTTERS
DOVER FOXCROFT, ME—2026-07-14 00:00:00
REDI-ROCK OF CENTRAL MAINE
BENTON, ME—2026-07-13 00:00:00
LEN POULIN, INC.
PORTLAND, ME—2026-07-06 00:00:00
NEW ENGLAND REHABILITATION HOSPITAL OF PORTLAND
DOVER FOXCROFT, ME—2026-07-06 00:00:00
SHAW'S SUPERMARKETS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339110850.