OSHA Inspection: HONDA LOCK OF AMERICA CO., INC.

Issued

2013-09-27 00:00:00

Abate by

2013-10-09 00:00:00

Penalty

Initial $2550.00 · Current $1530.00 Reduced

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:  a) At the maintenance area- The employer did not anchor a Sunnex 150 Ton Heavy Duty Air/Hydraulic Press exposing operators to struck by hazards.

Issued

2013-09-27 00:00:00

Abate by

2013-10-17 00:00:00

Penalty

Initial $2550.00 · Current $1530.00 Reduced

General-duty citation text

29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:  a) At the 6 Ton Machine area- The employer did not reduce the compressed air hose pressure to less than 30 p.s.i. used for cleaning, exposing employees to laceration hazards.

Issued

2013-09-27 00:00:00

Abate by

2013-10-09 00:00:00

Penalty

Initial $3400.00 · Current $2040.00 Reduced

General-duty citation text

29 CFR 1910.253(b)(2)(iv): Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use:  a) At the Zinc Die Cast Area- The employer did not place valve protection caps on stored acetylene, oxygen and nitrogen compressed gas cylinders, exposing employees to struck by hazards.