OSHA Inspection: CHICK LUMBER INC.

Issued

2014-09-17 00:00:00

Abate by

2014-11-04 00:00:00

Penalty

Initial $3500.00 · Current $1750.00 Reduced

General-duty citation text

29 CFR 1910.180(d)(4): Complete inspection(s) of crane(s) were not performed at intervals as generally defined in 1910.180(d)(ii) with a determination made as to whether deficiencies constituted a safety hazard:    (a) Warehouse - The truck cranes did not have a periodic inspection.

Issued

2014-09-17 00:00:00

Abate by

2014-09-23 00:00:00

Penalty

Initial $3500.00 · Current $1750.00 Reduced

General-duty citation text

29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:    (a) Warehouse - The Circuit Breakers were not labeled as to their use.

Issued

2014-09-17 00:00:00

Abate by

2014-09-23 00:00:00

Penalty

Initial $4900.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets of other forms of approved enclosures, or other means listed under this provision:    (a) Warehouse - The electrical panel was not guarded.

Issued

2014-09-17 00:00:00

Abate by

2014-09-23 00:00:00

Penalty

Initial $700.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1904.4(a): The employer did not keep records of fatalities, injuries and illnesses as required by this part:    (a) Office - The employer did not maintain OSHA 300/300A logs.

Issued

2014-09-17 00:00:00

Abate by

2014-09-23 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(a)(5): 29 CFR 1910.178(a)(5): Powered industrial truck(s) equipped with front-end attachments other than factory installed attachments require the user to request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered:  (a) Warehouse - The forklift attachments did not have capacity markings.

Issued

2014-09-17 00:00:00

Abate by

2014-09-23 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(6): The employer did not certify that each operator had been trained and evaluated as required by paragraph (l) through a certification that included the name of the operator, the date of the training, that date of evaluation, and the identity of the person(s) performing the training or evaluation:  (a) Office - The employer did not maintain a certification of forklift training.