Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: BENT METAL BUILDINGS LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BENT METAL BUILDINGS LLC in 2100 GLENHURST LANE, APPLETON, WI 54912 (NAICS 238130). OSHA activity number 340183870.

Watch Bent Metal Buildings LLC — free Get an email when a new federal OSHA severe-injury report for Bent Metal Buildings LLC is published. One employer, no account, unsubscribe in one click.
Site address
2100 GLENHURST LANE
City
APPLETON
State
WI
ZIP
54912
Mailing
4730 STEELHEAD RUN, OCONTO, WI 54153
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
7
Ownership type
A

3 citations on file for this inspection.

1926.501 B13

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $2000.00
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a)  On or about 01-09-15, an employee performing residential construction was walking/working on top of trusses at approximately eighteen (18) feet above lower surface without utilizing fall protection.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $2000

1926.502 B03

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.502(b)(3): Guardrail systems were not capable of withstanding, without failure, a force of at least 200 pounds (890 N) applied within 2 inches (5.1 cm) of the top edge, in any outward or downward direction, at any point along the top edge:  a)  On or about 01-09-15, an employee was working on a roof utilizing an ARCO Building Systems guardrail on an eave edge nine and one half (9.5) ft. above the lower surface without the top surface rated to withstand 200 lbs. of force without failure.  The posts were not spaced at a maximum of eight (8) ft. apart, the rails were not secured, and an open-edge guardrail holder was used on the eave edge.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.502 B05

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.502(b)(5): Midrails, screens, mesh, intermediate vertical members, solid panels, and equivalent structural members were not capable of withstanding, without failure, a force of at least 150 pounds (666 N) applied in any downward or outward direction at any point along the midrail or other member.  a)  On or about 01-09-15, an employee was working on a roof utilizing an ARCO Building Systems guardrail on an eave edge nine and one half (9.5) ft. above the lower surface without the midrails rated to withstand 150 lbs. of force without failure.  The posts were not spaced at a maximum of eight (8) ft. apart, the rails were not secured, and an open-edge guardrail holder was used on the eave edge.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View BENT METAL BUILDINGS LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340183870.