Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DRAGON PRODUCTS, LTD

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of DRAGON PRODUCTS, LTD in 946 TX LOOP 500 EAST, CENTER, TX 75935 (NAICS 332420). OSHA activity number 340491000.

Watch Dragon Products, LTD — free Get an email when a new federal OSHA severe-injury report for Dragon Products, LTD is published. One employer, no account, unsubscribe in one click.
Site address
946 TX LOOP 500 EAST
City
CENTER
State
TX
ZIP
75935
Mailing
1655 LOUISIANA STREET, BEAUMONT, TX 77701
Inspection type
Federal Agency (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332420
Employees
900
Ownership type
A

9 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $7000.00 · Current $2050.00 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer does not furnish employment and a place of employment which are free from recognized hazards that were causing or likely to cause death or serious physical harm to employees:    a) In the completion area, employees operated an overhead hoist to move material and product.  The hook did not have a self-closing safety-latch exposing employees to the hazard of being struck-by falling material.
Recent events (2)
  • — I (S) $2050
  • — Z (S) $7000

1910.134 E01

Other-than-serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $5000.00 · Current $2050.00 Reduced
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit-tested or required to use the respirator in the workplace:     a) In both the welding and paint booth areas, employees were not medically evaluated to ensure that they were able to wear tight-fitting respirators.
Recent events (2)
  • — I (O) $2050
  • — Z (S) $5000

1910.134 F02

Other-than-serious 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(f)(2): The employer did not ensure that an employee using a tight-fitting facepiece respirator was fit-tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) was used, and at least annually thereafter:    a) In both the welding and paint booth areas, employees, who wore tight-fitting respirators, were not fit-tested prior to use.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.146 C04

Deleted Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $7000.00 · Current $0.00 Reduced
29 CFR 1910.146(c)(4): When the employer decided that its employees would enter permit spaces, the employer did not implement a written permit space entry program that complied with 29 CFR 1910.146:  a) In the blast booth area, employees, who entered into frac-tanks to perform abrasive blasting operations, were exposed to atmospheric and physical hazards.  The employer did not implement all the requirements of a permit require confined space entry program.
Recent events (2)
  • — I (S) $0
  • — Z (S) $7000

1910.212 A01

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $7000.00 · Current $7000.00
29 CFR 1910.212(a)(1):     One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:
Recent events (2)
  • — I (S) $7000
  • — Z (S) $7000

1910.212 A01

Deleted Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $7000.00 · Current $0.00 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) In the Plasma area of the shop, employees were exposed to struck-by and amputation hazards while working near the unguarded moving track of the plasma machine.
Recent events (2)
  • — I (S) $0
  • — Z (S) $7000

1910.212 A03 II

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $2050.00
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, were not guarded:    a) In the metal fabrication shop, employees were not protected from placing their fingers, hands, or other body parts into the point of operation of the Baileigh press brake.
Recent events (2)
  • — I (S) $2050
  • — Z (S) $0

1910.303 B02

Other-than-serious 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $5000.00 · Current $2050.00 Reduced
29 CFR 1910.303(b)(2): Listed or labeled equipment was not installed and used in accordance with any instructions included in the listing or labeling:    a) In the welding area, employees used electrical outlet boxes (knock-out boxes) to power welding equipment that were not affixed to a permanent structure.
Recent events (2)
  • — I (O) $2050
  • — Z (S) $5000

1910.305 A02 X

Other-than-serious 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(a)(2)(x): Flexible cords and cables were not protected from accidental damage:    a) In the welding area, employees were exposed to electrical hazards while using electrical cords that had damaged insulation and outer sheathing to power welding equipment.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

View DRAGON PRODUCTS, LTD's full OSHA safety record →

RNWBL

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340491000.