WASHINGTON, DC —
OSHA Inspection: HOUR MASONRY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HOUR MASONRY, INC. in 1209 10TH ST. NW, WASHINGTON, DC 20001 (NAICS 238140). OSHA activity number 340586932.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HOUR MASONRY, INC.
- Site address
- 1209 10TH ST. NW
- City
- WASHINGTON
- State
- DC
- ZIP
- 20001
- Mailing
- 9934 PARK STREET, LANHAM, MD 20706
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.501 B13
- Issued
- Aug 19, 2015
- Abate by
- Aug 25, 2015
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor was the employee provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b). On or about April 27, 2015, an employee was working on a flat roof, approximately 27 feet above the ground without fall protection. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date completed, method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1926.503 A01
- Issued
- Aug 19, 2015
- Abate by
- Aug 31, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards. On or about April 27, 2015, the employer did not provide training that would enable employee to recognize the hazards of falling and the procedures to minimize the hazard. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date completed, method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B04
- Issued
- Aug 19, 2015
- Abate by
- Aug 25, 2015
- Penalty
- Initial $1,600 · Current $1,120 Reduced
General-duty citation text
29 CFR 1926.1053(b)(4): Ladders were used for purposes other than the purposes for which they were designed. On or about April 27, 2015, employees used a 70 inch stepladder in the closed position, leaned against an exterior wall and positioned on a wooden pallet to enter the residential construction site. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date completed, method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1120
- — Z (S) $1600
1926.1060 A
- Issued
- Aug 19, 2015
- Abate by
- Aug 31, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would train each employee in the procedures to be followed to minimize hazards related to ladders and stairways. On or about April 27, 2015, employees did not receive training to minimize the hazards associated with improper ladder use such as but not limited to using a stepladder in the closed position. The employer stated no training in ladder safety was provided. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date completed, method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 238140)
More inspections in DC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340586932.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.