Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: AMERICAN CUSTOM DESIGN WOODWORKING INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of AMERICAN CUSTOM DESIGN WOODWORKING INC. in 168 SANDBORN RD, TILTON, NH 03276 (NAICS 321999). OSHA activity number 340925643.

Watch American Custom Design Woodworking INC. — free Get an email when a new federal OSHA severe-injury report for American Custom Design Woodworking INC. is published. One employer, no account, unsubscribe in one click.
Site address
168 SANDBORN RD
City
TILTON
State
NH
ZIP
03276
Mailing
168 SANBORN RD, TILTON, NH 03276
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321999
Employees
3
Ownership type
A

8 citations on file for this inspection.

1910.134 E01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $800.00 Reduced

Hazardous substances 04352440D615

29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:    Location: Spray Booth Area    a.    On or about September 17, 2015, an employee had not had a medical evaluation prior to initial use of respirators for activities such as, but not limited to, spraying lacquer and sealants on wooden doors and cabinets.  The employee wears a 3M half-face respirator with OV cartridges for potential exposure to respiratory hazards including: Diethylene glycol monoethyl ether, 2-butoxyethanol, and titanium dioxide.
Recent events (2)
  • — I (S) $800
  • — Z (S) $1600

1910.134 K06

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 04352440M328

29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:    Location: Spray room area   a.  Employees wearing voluntary use half-face respirators had not been provided with information and training as required in Appendix D of the respiratory protection standard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.213 H01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1000.00 Reduced
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the materials:     Location: Facility on bench:    a.  On or about September 17, 2015, a Delta Rockwell radial saw's lower blade portion was not guarded.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1910.213 I01

Deleted Serious Gravity 5 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $0.00 Reduced
29 CFR 1910.213(i)(1): Non-working portion(s) of the saw blade were not enclosed or guarded:    Location: Main woodworking floor    a. Shop - On or about September 17, 2015, a large green bandsaw next to the planer had non-working portions of the blade not guarded to prevent accidental contact during operation.   b. Shop - On or about September 17, 2015, a large green bandsaw next to the wood storage room had non-working portions of the blade not guarded to prevent accidental contact during operation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2000

1910.1200 E01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1000.00 Reduced

Hazardous substances 0435244092109211D615

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:      Location: Facility.  a.      On or about September 17, 2015, the employer did not develop, implement and maintain a written hazard communication program for employees working with and around hazardous chemicals including but not limited to: Diethylene glycol monoethyl ether, 2-butoxyethanol, titanium dioxide, and hard and soft woods dusts.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1910.1200 G01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 0435244092109211D615

29 CFR 1910.1200(g)(1): The employer did not have a safety data sheet in the workplace for each hazardous chemical which they use:    Location: Facility.    a.      On or about September 17, 2015, the employer did not obtain safety data sheets for hazardous chemicals used at the facility.  Hazardous chemicals at this facility include but are not limited to: Diethylene glycol monoethyl ether, 2-butoxyethanol, titanium dioxide, and hard and soft wood dusts.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H02

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 0435244092109211D615

29 CFR 1910.1200(h)(2): The employer did not inform employees information that included the requirements of 29 CFR 1910.1200(h)(2)(i) through (h)(2)(iii):    Location: Facility  a.      On or about September 17, 2015, the employer did inform employees about hazard communication and chemical hazards present in the workplace for employees working with and around hazardous chemicals including but not limited to: Diethylene glycol monoethyl ether, 2-butoxyethanol, titanium dioxide, and hard and soft woods.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H03

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 0435244092109211D615

29 CFR 1910.1200(h)(3):  The employer did not provide training for employees that included the requirements of 29 CFR 1910.1200(h)(3)(i) through (h)(3)(iv):   Location: Facility.  a.      On or about September 17, 2015, employees exposed to chemicals in their workplace were not provided with effective information and training on hazardous chemicals in their work area.  Additionally training did not include GHS 2012 information.  Hazardous chemicals at this facility include but are not limited to: Diethylene glycol monoethyl ether, 2-butoxyethanol, titanium dioxide, and hard and soft wood dusts.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View AMERICAN CUSTOM DESIGN WOODWORKING INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340925643.