OSHA Inspection: DMG MASONRY, LTD.

Issued

2016-04-07 00:00:00

Abate by

2016-04-21 00:00:00

Penalty

Initial $6300.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.451(b)(7): On scaffolds where platforms were overlapped to create a long platform, the overlap did not occur only over supports, and/or was less than 12 inches (30 cm) when the platforms were not nailed together or otherwise restrained to prevent movement.  Employee was exposed to fall hazards from scaffolding due to scaffold planks not being properly secured together or supported to keep the planks from moving.

Issued

2016-04-07 00:00:00

Abate by

2016-04-21 00:00:00

Penalty

Initial $6300.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.451(e)(9)(i): The employer did not provide safe means of access for each employee erecting or dismantling a scaffold:  On or about October 8, 2016 and at times prior to, employees were exposed to fall hazards when an A-frame ladder was used to access and egress the upper level of a scaffold during the reassembly of a scaffold that had the frame erected and was partially planked.

Issued

2016-04-07 00:00:00

Abate by

2016-04-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.451(g)(2): The employer did not provide fall protection for employees erecting or dismantling supported scaffolds:  On or about October 8, 2015, an employee reassembling a scaffold without fall protection was exposed to a fall hazard greater than 10-feet.

Issued

2016-04-07 00:00:00

Abate by

2016-04-21 00:00:00

Penalty

Initial $6300.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.1053(b)(13): The top or step of a stepladder was used as a step:  On or about October 8, 2015 and at times prior to, employees were exposed to fall hazard while using the upper and top steps of an "A" frame ladder to access a scaffold which was shorter than the scaffold height.