OSHA Inspection: DOUBLE H CONSTRUCTION & DEVELOPMENT

Issued

2016-04-11 00:00:00

Penalty

Initial $1200.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:    a. On or about February 10, 2016, an employee handing plywood up to other employees working on the roof was not wearing a hard hat, being exposed to head injuries.

Issued

2016-04-11 00:00:00

Penalty

Initial $1200.00 · Current $100.00 Reduced

General-duty citation text

29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:    a. On or about February 10, 2016, employees were operating nail guns and a Makita Skil saw without wearing safety glasses, being exposed to eye injuries.

Issued

2016-04-11 00:00:00

Penalty

Initial $4900.00 · Current $4900.00

General-duty citation text

29 CFR 1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems:  a.  On or about February 10, 2016, employees sheathing a 7:12 pitch roof were not protected from falling 10 feet by the use of a guardrail system, safety net system, or personal fall arrest system.

Issued

2016-04-11 00:00:00

Penalty

Initial $4200.00 · Current $4200.00

General-duty citation text

29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed:  a. On or about February 10, 2016, employees were using a Werner 8-foot step ladder in the closed position leaned against the wall to reach a higher position, being exposed to fall hazards.

Issued

2016-04-11 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:  a. On or about February 10, 2016, employees were using a Werner 8-foot step ladder to gain access and exit from a 10 foot wall, exposed to fall hazards.