OSHA Inspection: 7 CEDARS CASINO

Issued

2016-07-28 00:00:00

Abate by

2016-08-23 00:00:00

Penalty

Initial $3000.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:    In the Slot shop there was a bench grinder that had its work rest adjusted to 1/2 inch from the surface of the grinding wheel.

Issued

2016-07-28 00:00:00

Abate by

2016-08-23 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:    A)      The bench grinder in the slot shop had its tongue guards adjusted 1/2 inch from the surface of the grinding wheel.

Issued

2016-07-28 00:00:00

Penalty

Initial $3000.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:     A)     In the stage area of the event center a set of stage lights were plugged into a power strip.

Issued

2016-07-28 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:    A)     In the security section there was an electrical junction box that had an access hole that was not closed.

Issued

2016-07-28 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein:  A)     In the dishwashing area of the main kitchen, there was a chemical bottle that was not labeled as to its contents.