OSHA Inspection: CHERIBUNDI, INC

Issued

2016-09-20 00:00:00

Abate by

2016-10-24 00:00:00

Penalty

Initial $8730.00 · Current $6984.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    a)  Production Area, on or about 8/16/16:  Lockout procedures were not utilized while performing maintenance on a STA Pack case sealer, Serial #AK027031.    Abatement documentation must be submitted for this item.

Issued

2016-09-20 00:00:00

Abate by

2016-10-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to Items A-D of this section:    a)  At the establishment, on or about 8/30/16:   Machine specific lockout/tagout procedures were not adequate it that there were no specific procedural steps for isolating, blocking and securing machine, dissipating any stored energy and no specific requirements for testing equipment to determine and verify effectiveness of lockout devices for employees performing servicing and/or maintenance on various equipment, including, but not limited to filler, case sealer, labeler, bottle sorter, steam tunnel, etc.    Abatement documentation must be submitted for these items.

Issued

2016-09-20 00:00:00

Abate by

2016-10-24 00:00:00

Penalty

Initial $8730.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees:    a)  At the establishment, on or about 8/30/16:  Adequate training was not provided to affected and authorized employees on the lockout/tagout program and procedures to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices and to ensure that the purpose and function of the program are understood by employees.    Abatement documentation must be submitted for this item.

Issued

2016-09-20 00:00:00

Penalty

Initial $3500.00 · Current $800.00 Reduced

General-duty citation text

29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours:    a)  At the establishment, on or about 8/16/16:  The employer did not report an employee who had received a finger amputation on 8/16/16 to OSHA within 24 hours.