OSHA Inspection: PRE-BILT MFG LLC

Issued

2017-01-24 00:00:00

Abate by

2017-02-01 00:00:00

Penalty

Initial $1630.00 · Current $980.00 Reduced

General-duty citation text

29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:    WORKPLACE:    The following fire extinguishers in the shop were not located, mounted, identified and/or were readily accessible:       1.    A Nitrogen Compressed gas extinguisher which was mounted by kitchen door and the stairs to the overhead storage area. There was no sign marking its location.    2.    A 5-pound Kidde ABC Dry Chemical extinguisher found free standing on the floor under the Compound miter saw bench and blocked by a stack of lumber on the floor in front of the bench.    3.    A 5-pound General ABC Dry Chemical extinguisher found free standing on the floor under the Compound miter saw bench and blocked by a stack of lumber on the floor in front of the bench.

Issued

2017-01-24 00:00:00

Abate by

2017-02-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly:     WORKPLACE:    The employer did not ensure that the following fire extinguishers in the shop were visually inspected on a monthly basis:    1.    A Nitrogen Compressed gas extinguisher which was mounted by kitchen door and the stairs to the overhead storage area.   2.    A 5-pound Kidde ABC Dry Chemical extinguisher found free standing on the floor under the Compound miter saw bench.  3.    A 5-pound General ABC Dry Chemical extinguisher found free standing on the floor under the Compound miter saw bench.

Issued

2017-01-24 00:00:00

Abate by

2017-02-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check:  WORKPLACE:    The employer did not ensure that the following fire extinguishers in the shop were subjected to annual maintenance checks:     1.    A Nitrogen Compressed gas extinguisher which was mounted by kitchen door and the stairs to the overhead storage area.   2.     A 5-pound Kidde ABC Dry Chemical extinguisher found free standing on the floor under the Compound miter saw bench.  3.    A 5-pound General ABC Dry Chemical extinguisher found free standing on the floor under the Compound miter saw bench.

Issued

2017-01-24 00:00:00

Abate by

2017-02-24 00:00:00

Penalty

Initial $2716.00 · Current $1630.00 Reduced

General-duty citation text

29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates and markings were in place:    WORKPLACE:    The Toyota LPG powered industrial forklift, Model FG25, was missing the data/name plate.

Issued

2017-01-24 00:00:00

Abate by

2017-02-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  WORKPLACE:    The employer did not ensure through providing and performing training and evaluation that employees authorized and allowed to operate the Toyota model FG25 LPG powered industrial forklift (PIT) were competent to operate the PIT safely at all times.

Issued

2017-01-24 00:00:00

Abate by

2017-02-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):    WORKPLACE:    The Toyota LPG powered industrial forklift, Model FG25, had damaged and defective lighting and emergency brake, and the forklift was not removed from service.

Issued

2017-01-24 00:00:00

Abate by

2017-02-01 00:00:00

Penalty

Initial $2716.00 · Current $1630.00 Reduced

General-duty citation text

29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:    WORKPLACE:    The portable table saw, no name or data plate used for ripping plywood was missing the guard.

Issued

2017-01-24 00:00:00

Abate by

2017-02-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.213(h)(1): Radial saw(s) did not have an upper hood that completely enclosed the upper portion of the blade down to a point including the end of the saw arbor:  WORKPLACE:    The lower blade guard of the Porter Cable 12 compound miter saw, Model 3802 & Serial Number 015622, used to cut wood was damaged, exposing employees to injury.