OSHA Inspection: CHERRY CRUSHED CONCRETE, INC.

Issued

2017-07-13 00:00:00

Abate by

2017-08-01 00:00:00

Penalty

Initial $12548.00 · Current $12548.00

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a)  At the conveyor, specific energy control procedures were not developed, documented and utilized for Conveyor TI40-8 EQ 1151, exposing employees to struck-by and caught-in hazards when performing maintenance tasks such as, but not limited to, cleaning the Skirt Board.

Issued

2017-07-13 00:00:00

Abate by

2017-08-01 00:00:00

Penalty

Initial $12548.00 · Current $12548.00

General-duty citation text

29 CFR 1910.147(c)(5)(ii): Lockout devices and tagout devices were not singularly identified:  a)  At 616 FM 521, Fresno, Texas, the lockout devices were not singularly identified, exposing employees to struck- by and caught-in hazards.

Issued

2017-07-13 00:00:00

Abate by

2017-08-01 00:00:00

Penalty

Initial $12548.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolate:  a)  At 616 FM 521, Fresno, Texas, authorized employees were not trained in recognizing the applicable hazardous energy sources of a Conveyor TI40-8 EQ 1151, exposing employees to struck-by and caught-in hazards.

Issued

2017-07-13 00:00:00

Abate by

2017-08-01 00:00:00

Penalty

Initial $12548.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure:  a) At 616 FM 521, Fresno, Texas, the affected employees were not instructed in the purpose and use of energy control procedure on the Conveyor TI40-8 EQ 1151, exposing employees to struck-by and caught-in hazards.

Issued

2017-07-13 00:00:00

Abate by

2017-08-01 00:00:00

Penalty

Initial $12548.00 · Current $12548.00

General-duty citation text

29 CFR 1910.147(d)(6): Prior to starting work on machines or equipment that had been locked-out or tagged-out, the authorized employee did not verify that isolation and deenergization of the machine or equipment had been accomplished:  a)  At 616 FM 521, Fresno, Texas, the isolation and deenergization of Conveyor TI40-8 EQ 1151 was not verified prior to work, exposing employees to struck-by and caught-in hazards.