Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: FUSION BABBITTING COMPANY, INC.

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of FUSION BABBITTING COMPANY, INC. in 4540 W. BURNHAM ST., MILWAUKEE, WI 53219 (NAICS 333613). OSHA activity number 342221728.

Watch Fusion Babbitting Company, INC. — free Get an email when a new federal OSHA severe-injury report for Fusion Babbitting Company, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4540 W. BURNHAM ST.
City
MILWAUKEE
State
WI
ZIP
53219
Mailing
4540 W. BURNHAM ST., MILWAUKEE, WI 53219
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333613
Employees
43
Ownership type
A

6 citations on file for this inspection.

1910.134 D01 II

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3802.00 · Current $5000.00
29 CFR 1910.134(d)(1)(ii): The employer did not select and use a NIOSH-certified respirator in compliance with the conditions of its certification:    (a)  The North full face air supplied respirator being used in the spray weld booth was not provided with appropriate connections and hoses required to maintain the NIOSH certification and ensure adequate employee protection.
Recent events (2)
  • — I (S) $5000
  • — Z (S) $3802

1910.134 D01 III

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminant's chemical state and physical form:   (a)  The employer had not performed monitoring or assessment of the potential exposure to air contaminants in the metal spray operation prior to the selection and use of a North elastomeric full face air supplied respirator.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 E01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $6338.00 · Current $0.00 Reduced
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:    (a)  The employee using the North full face air supplied elastomeric respirator for the metal spray operation was not provided a medical evaluation for respirator use.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6338

1910.134 F01

Serious Gravity 1 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):    (a)  The employee using the North full face elastomeric air supplied respirator for the metal spray operation was not provided a fit test before use.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1025 H01

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $6338.00 · Current $3000.00 Reduced

Hazardous substances 1591

29 CFR 1910.1025(h)(1): All surfaces were not maintained as free as practicable of accumulations of lead:    (a)  Surfaces in the lunchroom and conference room table were determined to contain lead contamination with the potential for exposure to employees eating and drinking in this area.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $6338

1910.1025 L01 I

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 1591

29 CFR 1910.1025(l)(1)(i): Employee(s) working in an area where there is potential exposure to airborne lead at any level were not informed of the content of Appendices A and B of 29 CFR 1910.1025:  (a)  Employees working with "Babbitt" in the facility were not informed of the contents of Appendices A and B of the lead standard 29 CFR 1910.1025, regarding practices to identify, eliminate and prevent exposure to the lead contained in the material.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View FUSION BABBITTING COMPANY, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342221728.