OSHA Inspection: CHILTON MANUFACTURING CORPORATION

Issued

2017-08-16 00:00:00

Abate by

2017-09-25 00:00:00

Penalty

Initial $1385.00 · Current $831.00 Reduced

General-duty citation text

1910.22(a)(2): The floor of each workroom is maintained in a clean and, to the extent feasible, in a dry condition. When wet processes are used, drainage must be maintained and, to the extent feasible, dry standing places, such as false floors, platforms, and mats must be provided:      On or about June 30, 2017 the floor in the assembly area was not kept in a dry condition due to a leak in the roof and created a potential slip and/or fall hazard.

Issued

2017-08-16 00:00:00

Abate by

2017-09-14 00:00:00

Penalty

Initial $1847.00 · Current $1108.00 Reduced

General-duty citation text

1910.178(a)(6): The user shall see that all nameplates and markings are in place and are maintained in a legible condition:      a) On or about June 30, 2017 the large Toyota forklift did not have a nameplate in place on the lift.       b) On or about June 30, 2017 the nameplate and warning placard on the Nissan forklift were not legible.

Issued

2017-08-16 00:00:00

Penalty

Initial $1847.00 · Current $1108.00 Reduced

General-duty citation text

29 CFR 1910.303(b)(2): Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling:      On or about June 30, 2017 the set screw was missing from a 120V receptacle on the east wall near the fabrication area exposing the terminal and live wiring inside the metal receptacle box.

Issued

2017-08-16 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.37(a)(4): Safeguards designed to protect employees during an emergency (e.g., sprinkler systems, alarm systems, fire doors, exit lighting) must be in proper working order at all times:    On or about June 30, 2017 the exit sign in the southeast corner of the warehouse area was not illuminated.

Issued

2017-08-16 00:00:00

Abate by

2017-09-07 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.304(f)(1)(viii): Circuit breakers used as switches in 120-volt and 277-volt, fluorescent lighting circuits shall be listed and marked "SWD":     On or about June 30, 2017 three Square D 20 amp circuit breakers were used as light switches in the weld shop and the wash area and were not marked "SWD" to ensure they were rated for such use.