OSHA Inspection: AMERICAN CABLE COMPANY INC.

Issued

2018-02-09 00:00:00

Abate by

2018-03-08 00:00:00

Penalty

Initial $6467.00 · Current $6467.00

General-duty citation text

29 CFR 1910.217(c)(2)(i)(a): Point of operation guard(s) on mechanical power press(es) did not prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guard(s)  (a) Terminal Stamping - On or about 8/11/17, a Whitney-Jensen mechanical power press was not guarded to prevent employees from reaching around the guard, exposing employees to amputation hazards.

Issued

2018-02-09 00:00:00

Abate by

2018-03-08 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.217(c)(2)(i)(b): Point of operation guard(s) on mechanical power press(es) did not conform to the maximum permissible opening(s) specified in Table O-10:  (a) Terminal Stamping - On or about 8/11/17, a Whitney-Jensen mechanical power press had guard openings that were greater those permissible in Table O-10.

Issued

2018-02-09 00:00:00

Abate by

2018-03-08 00:00:00

Penalty

Initial $9054.00 · Current $9054.00

General-duty citation text

29 CFR 1910.219(b)(1): Flywheel(s) with parts seven feet or less above floor(s) or platform(s) were not guarded in accordance with the requirements specified in 29 CFR 1910.219(b)(1)(i) through (b)(1)(iv)  (a) Terminal Stamping - On or about 8/11/17, a Whitney-Jensen mechanical power press had a flywheel that was not guarded.  (b) Terminal Stamping - On or about 8/11/17, a mechanical power press of unknown make had a flywheel that was not guarded.

Issued

2018-02-09 00:00:00

Abate by

2018-03-08 00:00:00

Penalty

Initial $5174.00 · Current $5174.00

General-duty citation text

29 CFR 1910.219(c)(3): Vertical or inclined shafting seven -7 feet or less from floor or working platform was not enclosed with stationary casing(s)  (a) Cable Braiding - On or about 8/11/17, a Wardwell B-10 braider had a rotating vertical shaft that was not guarded.

Issued

2018-02-09 00:00:00

Abate by

2018-03-08 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(f)(1): Gear(s) were not guarded by a complete enclosure or by one of the methods specified in 29 CFR 1910.219(f)(1)(ii) and (f)(1)(iii):  (a) Cable Braiding - On or about 8/11/17, a Wardwell B-10 braider had a rotating gear that was not guarded.