1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: SHIELD CASEWORK LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of SHIELD CASEWORK LLC in 1120 ELLERBROOK RD, NORTH KANSAS CITY, MO 64116 (NAICS 326199). OSHA activity number 342925047.

Watch Shield Casework LLC — free Get an email when a new federal OSHA severe-injury report for Shield Casework LLC is published. One employer, no account, unsubscribe in one click.
Establishment
SHIELD CASEWORK LLC
Site address
1120 ELLERBROOK RD
City
NORTH KANSAS CITY
State
MO
ZIP
64116
Mailing
1120 ELLERBROOK RD, NORTH KANSAS CITY, MO 64116
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326199
Employees
40
Ownership type
A

2 citations on file for this inspection.

1910.132 D01 I

Serious Gravity 5 1 instance 27 exposed
Issued
Abate by
Penalty
Initial $5174.00 · Current $3622.00 Reduced
29 CFR 1910.132(d)(1)(i): The employer did not select and have each affected employee use, the types of personal protective equipment that would protect the affected employee(s) from the hazards identified in the hazard assessment:    Employees were exposed to chemical hazards. Employees used denatured alcohol and Integra Adhesive during manufacturing of solid surface items. Employees could become injured or ill because the latex gloves provided and used were not appropriate for the chemicals, such as denatured alcohol and Integra adhesive, with which they were used.
Recent events (2)
  • — I (S) $3621.8
  • — Z (S) $5174

5(a)(1)

Deleted Serious Gravity 5 1 instance 27 exposed
Issued
Abate by
Penalty
Initial $6467.00 · Current $0.00 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees from fire and explosion hazards.  Employees working in a solid surface fabrication shop located at 1120 Ellerbrook Road, North Kansas City, MO 64116 were exposed to fire and explosion hazards while working around the DT-75 dust collector containing combustible/explosive materials in large quantity.  Among other feasible and acceptable methods to correct these hazards are:  a)    Follow NFPA 654 Prevention of Fire and Dust Explosions from the Manufacturing Processing, and Handling of Combustible particulate Solids requires in paragraph 7.13.1.1.1. "Where an explosion hazard exists, air-material separators shall be located outside of buildings."    b)    Follow NFPA 654 Prevention of Fire and Dust Explosions from the Manufacturing Processing, and Handling of Combustible particulate Solids requires in paragraph 6.4.1 " If a room or building contains a dust explosion hazard as specified in 6.2.3.1 that is external to protected equipment, such areas shall be provided with deflagration venting to a safe outside location    c)     The requirements of NFPA 654 7.13.1.1.2 shall not apply when air material-separators are protected in accordance with 7.1.4 of this section, when air-material separators have a dirty-side volume of less than 8 ft3 (0.2 m3), when wet air-material separators meet all the criteria of 7.13.1.1.2(3)(a through c), and when an enclosureless air-material separators meet all the criteria of 7.13.1.1.2(4)(a through k).
Recent events (2)
  • — I (S) $0
  • — Z (S) $6467

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342925047.