ANNVILLE, PA —
OSHA Inspection: FORT INDIANTOWN GAP NATIONAL CEMETERY
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of FORT INDIANTOWN GAP NATIONAL CEMETERY in INDIANTOWN GAP ROAD, ANNVILLE, PA 17003 (NAICS 812220). OSHA activity number 343015590.
Where did this inspection happen?
- Establishment
- FORT INDIANTOWN GAP NATIONAL CEMETERY
- Site address
- INDIANTOWN GAP ROAD
- City
- ANNVILLE
- State
- PA
- ZIP
- 17003
- Mailing
- RR #2, BOX 484, ANNVILLE, PA 17003
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 812220
- Employees
- 25
- Ownership type
- D
Citations
9 citations on file for this inspection.
1910.95 D01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.95(d)(1): When information indicated that any employee's exposure equaled or exceed the 8-hour time-weighted average of 85 decibels, the employer did not develop and implement a monitoring program: (a) FTIG Cemetery - The employer did not conduct noise monitoring to determine if any employee's exposure equaled or exceeded the 8-hour time-weighted average of 85 decibels, on or before March 14, 2018 Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (S) $0
1910.215 B09
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Maintenance Complex - The tongue guard on the eight inch bench grinder used to sharpen mower blades exceeded 1/4 inch requirement and had a distance of 5/8 of an inch, on or about March 14, 2018. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (S) $0
1910.242 B
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i; a) Maintenance complex - The compressed air used for cleaning equipment including but not limited to; mowers, tractors, service bays and personnel was measured at 80 p.s.i., on or about March 14, 2018. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (S) $0
1910.1200 E01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): a) Facility - The employer did not develop and implement a hazard communication program for employees exposed to hazardous ingredients in chemicals used from products such as but not limited to: pro outdoor bleach, PB Blaster, calcium & lime remover (CLR), on or about March 14, 2018 Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
- — Z (S) $0
1910.1200 G01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use: a) Facility - The employer diid not have safety data sheet (SDSs) for the products used containing chemicals such as but not limited to; sodium hypochlorite, sodium hydroxide, acetone N-(2-hydroxyethyl)-dodecanamide, on or about March 14, 2018. Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
- — Z (S) $0
1910.1200 H01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Facility - The employer did not provide training to employees who used chemicals such as but not limited to chemicals used from products such as but not limited to: pro outdoor bleach, PB Blaster, calcium & lime remover (CLR), on or about March 14, 2018 Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
- — Z (S) $0
1910.132 D02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: a) FTIG Cemetery - The employer did not certify that a workplace personal protective equipment hazard assessment had be completed, on or about March 14, 2018. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (O) $0
1910.134 K06
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer: (a) FTIG Cemetery - The employer did not provide the basic advisory information on respirators for employees who voluntarily wore 3M N95 disposable dust masks, on or about March14, 2018. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (O) $0
1910.215 D01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(d)(1): Wheel(s) on grinding machine(s) were not sounded (ring test) and inspected for damage before mounting: (a) Maintenance Complex - Employer did not ensure that ring tests were conducted on the stone wheels used to sharpen mower blades, on or about March 14, 2018 Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (O) $0
More inspections in this industry (NAICS 812220)
PASO ROBLES, CA—2026-06-25
4283929 DELAWARE LLC
FLORENCE, SC—2026-06-24
U.S. DEPT OF VETERANS AFFAIRS
SAN JUAN, PR—2026-06-18
MUNICIPIO DE SAN JUAN
IGO, CA—2026-06-15
NORTHERN CALIFORNIA VETERANS CEMETERY
BOARDMAN, OH—2026-06-09
MILL CREEK MEMORIAL PARK CEMETERY ASSOCIATION
More inspections in PA
MILTON, PA—2026-07-10
HOMETOWN FOODS CHEF BOYARDEE CO.
SUNBURY, PA—2026-07-10
DEMPSEY UNIFORM & LINEN SUPPLY, INC
LANDISVILLE, PA—2026-07-10
FAIRVIEW DEMOLITION LLC
YORK, PA—2026-07-10
AMERICAN SPECIALTY SYSTEMS INC.
WILLIAMSPORT, PA—2026-07-10
INTERNATIONAL PAINT PROS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343015590.