WASHINGTON, MO —
OSHA Inspection: LMI AEROSPACE INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of LMI AEROSPACE INC. in 6325 AVANTHA DRIVE, WASHINGTON, MO 63090 (NAICS 332710). OSHA activity number 343103222.
Where did this inspection happen?
- Establishment
- LMI AEROSPACE INC.
- Site address
- 6325 AVANTHA DRIVE
- City
- WASHINGTON
- State
- MO
- ZIP
- 63090
- Mailing
- 6325 AVANTHA DRIVE, WASHINGTON, MO 63090
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 150
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.28 B11 II
- Issued
- Abate by
- Penalty
- Initial $5543.00 · Current $3326.00 Reduced
General-duty citation text
29 CFR 1910.28(b)(11)(ii): Each flight of stairs having at least three (3) treads and at least four (4) risers is equipped with stair rail systems and handrails as follows: At 6325 Avantha Drive, Washington, MO, specifically inside of the Machine Shop, a flight of metal stairs leading up to the MAZAK 1400 5-Axis Milling Machine was missing a mid-rail. This violation was noted on 08/30/18.
Recent events (3)
- — J (O) $3326
- — C (S) $5543
- — Z (S) $5543
1910.135 A01
- Issued
- Abate by
- Penalty
- Initial $7391.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.135(a)(1): The employer did not ensure that each affected employee wear a protective helmet when working in areas where there is a potential for injury to the head from falling objects: At 6325 Avantha Drive, Washington, MO, specifically inside of the Machine Shop, the operator of a Harrington 2T Underslung Crane was required to lift a 7"W X 163"L metal beam up over the 80"H coaming surrounding the MAZAK 1400 5-Axis Milling Machine. A hard hat or the equivalent was not provided. This violation was noted on 08/30/18.
Recent events (3)
- — J (S) $0
- — C (S) $7391
- — Z (S) $7391
1910.147 C04 I
- Issued
- Abate by
- Penalty
- Initial $9239.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: At 6325 Avantha Drive, Washington, MO, on 08/30/2018, specific procedures for the effective energy isolation of the following machines were not documented: a/ MAZAK 1400 5-Axis Milling Machine. b/ Marathon Vertical Baler, m/n V-6030, s/n 306152. c/ Amada Press Brake, m/n RG-100. d/ Amada Press Brake, m/n 35. e/ Amada Press Brake, m/n 50.
Recent events (3)
- — J (S) $0
- — C (S) $9239
- — Z (S) $9239
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $7391.00 · Current $4435.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: At 6325 Avantha Drive, Washington, MO, on 08/30/18, specifically inside of the Machine Shop, the rotating parts belonging to the following machines were inadequately guarded: a/ Delta Drill Press 5-Speed, s/n 1230074. b/ Palmgren Drill Press, m/n 80110B, s/n 201405. c/ Palmgren Drill Press, m/n 80110B, s/n 201410
Recent events (3)
- — J (S) $4435
- — C (S) $7391
- — Z (S) $7391
1910.335 A01 I
- Issued
- Abate by
- Penalty
- Initial $9239.00 · Current $5543.00 Reduced
General-duty citation text
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not provided with electrical protective equipment that was appropriate for the specific parts of the body that needed to be protected and for the work being performed: At 6325 Avantha Drive, Washington, MO, specifically inside of the Sheetmetal Department, employee(s) were not provided with suitable personal protective equipment or barriers to guard against the hazard of arc flash. This violation was noted on 08/30/2018.
Recent events (3)
- — J (S) $5543
- — C (S) $9239
- — Z (S) $9239
More inspections at LMI AEROSPACE INC.
COTTONWOOD FALLS, KS—2021-10-06 00:00:00
LMI AEROSPACE, INC
COTTONWOOD FALLS, KS—2018-02-08 00:00:00
LMI AEROSPACE, INC
SAINT CHARLES, MO—2012-06-07 00:00:00
LMI AEROSPACE INC.
View LMI AEROSPACE INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
CAMBRIDGE, MN—2026-07-09
111567 - VISION MACHINE INC
SAINT PAUL, MN—2026-07-09
111558 - ST PAUL MACHINE - DESIGN INC
EVERETT, WA—2026-07-07
WA317991968 - ONOMAC INDUSTRIES INC
SOUTH DEERFIELD, MA—2026-07-07
VISION MACHINING INC
LAKEVILLE, MN—2026-07-02
111518 - KD HOLDING COMPANY INC DBA MEDFAB MANUFACTURING CO
More inspections in MO
KANSAS CITY, MO—2026-07-09
NIAGARA BOTTLING
MONETT, MO—2026-07-09
MONETT METALS INC.
PARKVILLE, MO—2026-07-08
SKY-TECH ROOFING, LLC.
SPRINGFIELD, MO—2026-07-07
D & C CONSTRUCTION, LLC.
JOPLIN, MO—2026-07-07
SERVICE RECYCLING - NORTH PLANT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343103222.