OSHA Inspection: SIEMENS MEDICAL SOLUTIONS USA, INC

Issued

2018-12-04 00:00:00

Abate by

2018-12-17 00:00:00

Penalty

Initial $9054.00 · Current $9054.00

General-duty citation text

29 CFR 1910.333(a)(1): "Deenergized parts." Live parts to which an employee may be exposed shall be deenergized before the employee works on or near them, unless the employer can demonstrate that deenergizing introduces additional or increased hazards or is infeasible due to equipment design or operational limitations. Live parts that operate at less than 50 volts to ground need not be deenergized if there will be no increased exposure to electrical burns or to explosion due to electric arcs.  Note 1: Examples of increased or additional hazards include interruption of life support equipment, deactivation of emergency alarm systems, shutdown of hazardous location ventilation equipment, or removal of illumination for an area.  Note 2: Examples of work that may be performed on or near energized circuit parts because of infeasibility due to equipment design or operational limitations include testing of electric circuits that can only be performed with the circuit energized and work on circuits that form an integral part of a continuous industrial process in a chemical plant that would otherwise need to be completely shut down in order to permit work on one circuit or piece of equipment.  Note 3: Work on or near deenergized parts is covered by paragraph (b) of this section.    Location: 62 Flanders-Bartley RD Flanders, NJ 07836-Production Line    a) Employees exposed to electrical shock hazards; employee working in close proximity to energized electrical current on Atellica IA machines on or about 7/3/18.