Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: BERGIES SEAFOOD INCORPORATED

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of BERGIES SEAFOOD INCORPORATED in 8 HASSEY STREET, NEW BEDFORD, MA 02740 (NAICS 311710). OSHA activity number 343401998.

Watch Bergies Seafood Incorporated — free Get an email when a new federal OSHA severe-injury report for Bergies Seafood Incorporated is published. One employer, no account, unsubscribe in one click.
Site address
8 HASSEY STREET
City
NEW BEDFORD
State
MA
ZIP
02740
Mailing
8 HASSEY STREET, NEW BEDFORD, MA 02740
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311710
Employees
49
Ownership type
A

5 citations on file for this inspection.

1910.147 C01

Serious Gravity 10 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $9054.00 · Current $3018.00 Reduced
29 CFR 1910.147(c)(1): Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative.      Worksite:    The employer did not develop a written lockout tagout program where employees perform maintenance on skinning machines and refrigeration equipment.  An employee troubleshooting a skinning machine in the maintenance shop suffered a finger amputation when his hand contacted an unguarded belt when he was determining the cause of noise after he replaced a bearing.
Recent events (3)
  • — F (S) $3018
  • — C (S) $9054
  • — Z (S) $9054

1910.212 A01

Deleted Serious Gravity 5 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $5174.00 · Current $0.00 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  Production Area:  The roller and blade pinch points of the two 'Baader 47-10' skinning machines were not guarded.
Recent events (3)
  • — F (S) $0
  • — C (S) $5174
  • — Z (S) $5174

1910.219 D01

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $9054.00 · Current $3018.00 Reduced
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded:    Maintenance Shop:    A belt drive of a skinning machine being troubleshooted was not guarded.
Recent events (3)
  • — F (S) $3018
  • — C (S) $9054
  • — Z (S) $9054

1904.4 A

Other-than-serious 1 instance 49 exposed
Issued
Abate by
Penalty
Initial $1294.00 · Current $324.00 Reduced
29 CFR 1904.4(a): The employer did not record each work-related fatality, injury or illness case that resulted in the general recording criteria on the OSHA Form 300 or equivalent.     Worksite:    The employer does not maintain OSHA 300 injury and illness logs. On the day of the inspection, July 9, 2018, the employer had not recorded an amputation accident that occurred on June 19, 2019 on the OSHA 300 form or equivalent.    Abatement Certification and Documentation is required.
Recent events (3)
  • — F (O) $324
  • — C (O) $1294
  • — Z (O) $1294

1904.39 A02

Other-than-serious 1 instance 49 exposed
Issued
Abate by
Penalty
Initial $6467.00 · Current $1617.00 Reduced
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye.    Worksite:    The employer did not report an amputation injury that occurred on June 19, 2018, to OSHA.
Recent events (3)
  • — F (O) $1617
  • — C (O) $6467
  • — Z (O) $6467

View BERGIES SEAFOOD INCORPORATED's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343401998.