WASHINGTON, DC —
OSHA Inspection: PRECISION WALL TECH INC.
Programmed Related inspection · Safety discipline
At a glance
On , OSHA opened a programmed Related safety inspection of PRECISION WALL TECH INC. in 2 15TH STREET NW, WASHINGTON, DC 20024 (NAICS 238320). OSHA activity number 343646626.
Where did this inspection happen?
- Establishment
- PRECISION WALL TECH INC.
- Site address
- 2 15TH STREET NW
- City
- WASHINGTON
- State
- DC
- ZIP
- 20024
- Mailing
- 605 RALEIGH PLACE SE, WASHINGTON, DC 20032
What kind of inspection was it?
- Inspection type
- Programmed Related (J)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238320
- Employees
- 60
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.451 C01 I
- Issued
- Abate by
- Penalty
- Initial $9282.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1926.451(c)(1)(i): Guys, ties, and braces were not installed at locations where horizontal members support both inner and outer legs a) On or about December 6, 2018; visitor screening center east-side of the monument; an employees was painting while on a bakers scaffold which was not secured to prevent the scaffold from tipping. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification. This documentation may include, but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $9282
1926.451 F12
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $2400.00
General-duty citation text
29 CFR 1926.451(f)(12): Work on or from scaffolds was not prohibited during storms or high winds and a competent person did not determine that it was safe for employees to be on the scaffold: a) On or about December 6, 2018; visitor screening center east-side of the monument; employees were working from a bakers scaffold performing painting operations during high winds of approximately 20 mph causing the scaffold to tip over. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification. This documentation may include, but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (O) $2400
- — Z (S) $0
1926.454 A
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $2400.00
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a) On or about December 6, 2018; visitor screening center east-side of the monument; employees were not trained in recognizing hazards while working on a scaffold system such as but not limited to the hazards associated with high winds and the securing of the scaffold system which resulted in to tip over. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification. This documentation may include, but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (O) $2400
- — Z (S) $0
More inspections at PRECISION WALL TECH INC.
WASHINGTON, DC—2024-11-26
PRECISION WALL TECH INC.
WASHINGTON, DC—2023-07-11 00:00:00
PRECISION WALL TECH INC
SILVER SPRING, MD—2013-04-09 00:00:00
PRECISION WALL TECH INC
WASHINGTON, DC—2007-04-05 00:00:00
PRECISION WALL TECH, INC.
COLLEGE PARK, MD—2003-03-18 00:00:00
PRECISION WALL TECH INC
View PRECISION WALL TECH INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238320)
SOUTH SAN FRANCISCO, CA—2026-07-16
STELLA PAINTING INC.
GRIDLEY, CA—2026-07-15
EMPIRE PAINTING AND DECORATING INC
UNIVERSITY PLACE, WA—2026-07-15
WA317992082 - ALL SEASON PAINTING LLC
ANNAPOLIS, MD—2026-07-14
JOSE EMILIO SORTO
ANNAPOLIS, MD—2026-07-14
BLUE STAR CHESAPEAKE HOLDINGS, LLC
More inspections in DC
WASHINGTON, DC—2026-06-30
U.S. DEPARTMENT OF AGRICULTURE
WASHINGTON, DC—2026-06-16
MACY'S
WASHINGTON, DC—2026-06-02
RIGO MULTISERVICES
WASHINGTON, DC—2026-06-02
DDC CPL LLC
WASHINGTON, DC—2026-06-02
DDC CPL LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343646626.