FORT STOCKTON, TX —
OSHA Inspection: LONGFELLOW RANCH PARTNERS, LP
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of LONGFELLOW RANCH PARTNERS, LP in 30'26'43.86"N 102'38'26'.46"W, FORT STOCKTON, TX 79735 (NAICS 112111). OSHA activity number 343763280.
Where did this inspection happen?
- Establishment
- LONGFELLOW RANCH PARTNERS, LP
- Site address
- 30'26'43.86"N 102'38'26'.46"W
- City
- FORT STOCKTON
- State
- TX
- ZIP
- 79735
- Mailing
- 16803 DALLA PARKWAY, ADDISON, TX 75001
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 112111
- Employees
- 14
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.132 D01 I
- Issued
- Abate by
- Penalty
- Initial $5304.00 · Current $5304.00
General-duty citation text
29 CFR 1910.132(d)(1)(i): The employer did not select and have each affected employee use, the types of personal protective equipment that would protect the affected employee(s) from the hazards identified in the hazard assessment: On or about January 31, 2019, employer did not conduct a job hazard assessment (JHA) when brazing a truck's gas tank to be able to identity proper personal protective equipment. This condition exposed employees to fire hazards.
Recent events (2)
- — I (O) $5304
- — Z (S) $5304
1910.252 B03
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.252(b)(3): Employees exposed to the hazards created by welding, cutting, or brazing operations were not protected by personal protective equipment. On or about January 31, 2019, employer did not enforce the use of personal protective equipment such as welding personal protective equipment and but not limited to transparent face shields or goggles. This condition exposed employee to fire hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.252 A02 III A
- Issued
- Abate by
- Penalty
- Initial $5304.00 · Current $5304.00
General-duty citation text
29 CFR 1910.252(a)(2)(iii)(A): The employer did not provide fire watchers whenever welding or cutting was performed in locations where other than a minor fire might develop: Mechanic shop: On or about January 31, 2019, a fire watch was not assigned while brazing a truck's gasoline tank. This condition exposed employees to fire hazards.
Recent events (2)
- — I (O) $5304
- — Z (S) $5304
1910.252 A03 I
- Issued
- Abate by
- Penalty
- Initial $5304.00 · Current $5304.00
General-duty citation text
29 CFR 1910.252(a)(3)(i): Welding, cutting, or other hot work was performed on used drums, barrels, tanks, or other containers that had not been cleaned so thoroughly as to make absolutely certain there were no flammable materials present or any substances such as greases, tars, acids, or other materials which where subjected to heat, might produce flammable or toxic vapors: Mechanic shop: On or about January 31, 2019, employees were blazing a truck's gas tank with flammable vapors in the tank. This condition exposed employees to fire hazards.
Recent events (2)
- — I (S) $5304
- — Z (S) $5304
1910.252 A02 II
- Issued
- Abate by
- Penalty
- Initial $5304.00 · Current $5304.00
General-duty citation text
29 CFR 1910.252(a)(2)(ii): Suitable extinguishing equipment was not maintained in a state of readiness for instant use: Mechanic shop: On or about February 5, 2019, two portable fire extinguishers were empty and were not ready for use. This condition exposed employee to fire hazards.
Recent events (2)
- — I (S) $5304
- — Z (S) $5304
1910.157 C01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: On or about February, 5, 2019, two portable fire extinguishers were not properly mounted. This condition exposed employees to fire hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 112111)
SUNNYSIDE, WA—2026-06-29
WA317992007 - MIDVALE CATTLE COMPANY LLC
FIVE POINTS, CA—2026-06-18
TRCC, INC.
SUNNYSIDE, WA—2026-05-26
WA317991396 - MIDVALE CATTLE COMPANY LLC
HEREFORD, TX—2026-05-15
2005 GO FARMING, LP
MARYSVILLE, CA—2026-05-15
JOHN AND LINDA MORELLO FARMS PARTNERSHIP
More inspections in TX
SPRING, TX—2026-07-10
DORSTENER WIRE TECH INC.
FORT WORTH, TX—2026-07-10
RC PROFESSIONAL ROOFING OF TEXAS LLC
CYPRESS, TX—2026-07-10
FEDERICO CARVAJAL GARCIA
SAN ANTONIO, TX—2026-07-10
ED LONG'S METAL WORKS
SAN ANTONIO, TX—2026-07-09
WAREHOUSE RACK COMPANY, LP
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343763280.