RICE LAKE, WI —
OSHA Inspection: RICE LAKE GLASS AND DOOR CO., INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of RICE LAKE GLASS AND DOOR CO., INC. in 2116 19TH STREET, RICE LAKE, WI 54868 (NAICS 238150). OSHA activity number 343771242.
Where did this inspection happen?
- Establishment
- RICE LAKE GLASS AND DOOR CO., INC.
- Site address
- 2116 19TH STREET
- City
- RICE LAKE
- State
- WI
- ZIP
- 54868
- Mailing
- 2116 19TH STREET, RICE LAKE, WI 54868
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238150
- Employees
- 12
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.176 B
- Issued
- Abate by
- Penalty
- Initial $5304.00 · Current $2652.00 Reduced
General-duty citation text
29 CFR 1910.176(b): Storage of material created a hazard: a) In the shop: On or about February 4, 2019, storage of the 4 feet by 10 feet aluminum metal sheets were not stored securely, resulting in a hospitalization due to crushing injuries.
Recent events (2)
- — I (S) $2652
- — Z (S) $5304
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $3789.00 · Current $2652.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Bridgeport in shop area: Rotating parts and flying chip guarding was not provided on the milling machine.
Recent events (2)
- — I (S) $2652
- — Z (S) $3789
1910.213 C01
- Issued
- Abate by
- Penalty
- Initial $3789.00 · Current $2652.00 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) In the shop: The Bosch TS3000 table saw did not have a hood guard.
Recent events (2)
- — I (S) $2652
- — Z (S) $3789
1910.213 C02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.213(c)(2): Each hand-fed circular ripsaw was not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) In the shop: The Bosch TS3000 table saw did not have a spreader.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.213(c)(3): Each hand-fed circular ripsaw was not provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) In the shop: The Bosch TS3000 table saw did not have nonkickback fingers or dogs.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 238150)
HARRISBURG, PA—2026-07-02
HERSHOCKS INC
HARRISBURG, PA—2026-07-02
HERSHOCKS INC
HOLLISTER, CA—2026-06-29
PAC CON GLAZING. INC.
SAN ANTONIO, TX—2026-06-24
ARROWALL COMPANY
BALTIMORE, MD—2026-06-15
A-L ABATEMENT, INC.
More inspections in WI
MUSCODA, WI—2026-07-10
SCOT INDUSTRIES, INC
FRANKLIN, WI—2026-07-10
EDGE BROADBAND SOLUTIONS LLC
APPLETON, WI—2026-07-10
LAWRENCE UNIVERSITY OF WISCONSIN
KIMBERLY, WI—2026-07-10
ENRIQUE RESENDIC
SLINGER, WI—2026-07-10
DYLAN MATTHEW SHELLEY LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343771242.