STOUGHTON, MA —
OSHA Inspection: HO TOY NOODLES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of HO TOY NOODLES, INC. in 1490 CENTRAL STREET, STOUGHTON, MA 02072 (NAICS 311824). OSHA activity number 343783676.
Where did this inspection happen?
- Establishment
- HO TOY NOODLES, INC.
- Site address
- 1490 CENTRAL STREET
- City
- STOUGHTON
- State
- MA
- ZIP
- 02072
- Mailing
- 12 UPHAM STREET, MALDEN, MA 02148
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311824
- Employees
- 15
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C01
- Issued
- Abate by
- Penalty
- Initial $4168.00 · Current $2918.00 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:: Production Room: The employer did not develop a written lockout tagout program for the egg roll line and for the noodle machines.
Recent events (2)
- — I (S) $2917.6
- — Z (S) $4168
1910.147 C04 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: Worksite: The employer did not develop machine specific lockout tagout procedures.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: Worksite: The employer did not train employees on the lockout tagout program.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $4168.00 · Current $2918.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Production Room: 1) The roll pinchpoint of the noodle machine was not adequately guarded. 2) The reciprocating part at the folder of the egg roll machine created a nippoint. 3) Two chain and sprocket wheels of the egg roll machine created pinchpoints.
Recent events (2)
- — I (S) $2917.6
- — Z (S) $4168
1910.212 A02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible: Production Room: The guard for the drive belt of the noodle machine was not secured to the machine or to the floor.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 D01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): Production Room: The pulley and belt drive of the noodkle machine was not completely enclosed by a guard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.219(f)(1): Gears shall be guarded: Production Room: The gear pinchpoints of a noodle machine were not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at HO TOY NOODLES, INC.
STOUGHTON, MA—2024-03-25 00:00:00
HO TOY NOODLES, INC.
STOUGHTON, MA—2023-05-17 00:00:00
HO TOY NOODLES, INC.
STOUGHTON, MA—2022-10-13 00:00:00
HO TOY NOODLES, INC.
STOUGHTON, MA—2016-08-31 00:00:00
HO TOY NOODLES, INC.
Boston, MA—1984-02-10
HO TOY NOODLES INC
View HO TOY NOODLES, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 311824)
BOLINGBROOK, IL—2026-06-26
TURANO KNEAD DOUGH BAKING COMPANY
WATKINSVILLE, GA—2026-06-15
YOUR SUPPLY, LLC
WATKINSVILLE, GA—2026-06-15
YOUR SUPPLY, LLC
GREEN BAY, WI—2026-06-09
PORT CITY BAKERY
SPRINGFIELD, IL—2026-06-03
MEL-O-CREAM DONUTS INTERNATIONAL, INC
More inspections in MA
WORCESTER, MA—2026-07-10
QUINSIGAMOND COMMUNITY COLLEGE
FITCHBURG, MA—2026-07-10
KELLEY WOOD PRODUCTS, INC.
EVERETT, MA—2026-07-10
HORIZON RETAIL CONSTRUCTION INC
NORTON, MA—2026-07-09
DYNAMIC RESIDENTIAL ROOF MARKETING, LLC
NORTON, MA—2026-07-09
LM GENERAL CONSTRUCTION INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343783676.