OSHA Inspection: CERSOSIMO LUMBER COMPANY, INC.

Issued

2019-08-29 00:00:00

Abate by

2019-09-11 00:00:00

Penalty

Initial $6440.00 · Current $3864.00 Reduced

General-duty citation text

29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:    a) Edger Area in Mill - On or prior to March 21, 2019, an employee was exposed to entanglement hazards due to working around an unguarded shaft on the transfer chain and sprocket belt that feeds wood boards to the edger.

Issued

2019-08-29 00:00:00

Abate by

2019-09-11 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed:  a) Edger Area in Mill - On or prior to March 21, 2019, an employee was exposed to pinch point hazards due to working around unguarded transfer chains and sprockets where the chain and sprocket belt feeds wood boards to the edger.

Issued

2019-08-29 00:00:00

Abate by

2019-09-11 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:  a) Mill Basement - On or prior to February 23, 2019, an employee was potentially exposed to flying sawdust particles due to not wearing safety glasses when cleaning sawdust out of the vibrating conveyor.