OSHA Inspection: BEST MAID COOKIE COMPANY

Issued

2020-01-06 00:00:00

Abate by

2020-02-03 00:00:00

Penalty

Initial $10419.00 · Current $8335.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:    a) Throughout the production area: The employer did not conduct periodic inspections of the machine specific energy control procedures on an at least annual basis.

Issued

2020-01-06 00:00:00

Abate by

2020-02-03 00:00:00

Penalty

Initial $13260.00 · Current $10608.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees:    a) Throughout the production area: The employer did not provide authorized level lockout tagout training to employees prior performing cleaning, setup and inspection activities on equipment including but not limited to mixers, drop machines, rollers and conveyors.

Issued

2020-01-06 00:00:00

Abate by

2020-02-03 00:00:00

Penalty

Initial $13260.00 · Current $10608.00 Reduced

General-duty citation text

29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s):    a) Throughout the production area: The employer did not ensure that energy sources were located and isolated prior to performing cleaning, setup and inspection activities on equipment including but not limited to mixers, drop machines, rollers and conveyors.

Issued

2020-01-06 00:00:00

Abate by

2020-02-03 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:  a) Throughout the production area: The employer did not ensure that lockout or tagout devices were affixed to each energy isolation source prior to performing cleaning, setup and inspection activities on equipment including but not limited to mixers, drop machines, rollers and conveyors.

Issued

2020-01-06 00:00:00

Abate by

2020-02-03 00:00:00

Penalty

Initial $6251.00 · Current $5000.00 Reduced

General-duty citation text

29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    a) Forklift battery charging area: The quick drenching facility was not located in the immediate area where corrosives were utilized.

Issued

2020-01-06 00:00:00

Abate by

2020-01-21 00:00:00

Penalty

Initial $6251.00 · Current $5000.00 Reduced

General-duty citation text

29 CFR 1910.178(q)(7): Powered industrial truck(s) which were used on a round-the-clock basis were not examined for defects after each shift:    a) Throughout the facility: The powered industrial vehicles were inspected once daily instead of at each shift.

Issued

2020-01-06 00:00:00

Abate by

2020-01-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(4)(i): 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not conducted at least once every three years:  a) Throughout the facility: The powered industrial vehicles operators were not evaluated on their operational performance at least once every three years.