Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: FORUM ENERGY TECHNOLOGIES, INC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of FORUM ENERGY TECHNOLOGIES, INC in 501 COUNTY RD 493, DAYTON, TX 77535 (NAICS 331210). OSHA activity number 344247481.

Watch Forum Energy Technologies, INC — free Get an email when a new federal OSHA severe-injury report for Forum Energy Technologies, INC is published. One employer, no account, unsubscribe in one click.
Site address
501 COUNTY RD 493
City
DAYTON
State
TX
ZIP
77535
Mailing
501 COUNTY RD 493, DAYTON, TX 77535
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331210
Employees
200
Ownership type
A

4 citations on file for this inspection.

1910.179 N01

Serious Gravity 10 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $13260.00 · Current $7956.00 Reduced
29 CFR 1910.179(n)(1): Crane(s) were loaded beyond the rated load (maximum load for which the crane or individual hoist was designed and built by the manufacturer and shown on the equipment nameplate(s):     On or about August 16, 2019, and at times prior thereto, in the Service Department and in the Winding Department of the facility where employees were exposed to stuck-by and crushed-by hazards while using overhead gantry cranes to lift loads without ensuring the loads were within the rated capacity of the cranes.
Recent events (2)
  • — I (S) $7956
  • — Z (S) $13260

1910.303 B07 IV

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $10419.00 · Current $5209.00 Reduced
29 CFR 1910.303(b)(7)(iv): Electric equipment had damaged parts that may adversely affect safe operation or mechanical strength of the equipment, such as parts that are broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating:    On or about August 20, 2019, on the west side of the Service Department where employees were exposed to electrical hazards while using and working near an electrical receptacle box that was broken without ensuring that the damaged part did not affect the safe operation of the equipment.
Recent events (2)
  • — I (O) $5209
  • — Z (S) $10419

1910.305 G02 III

Other-than-serious 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws:  On or about August 20, 2019, on the east side of the Service Department where employees were using a trolley to move tubing spools that had an emergency stop button was not connected to the trolley so that strain relief was provided to prevent pull from being applied to terminal screws.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 F06 II

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical:  On or about August 20, 2019, in the Service Department where employees were transferring a corrosion inhibitor into containers without marking the containers with the chemicals name or general hazard information.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View FORUM ENERGY TECHNOLOGIES, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344247481.