ODESSA, TX —
OSHA Inspection: PREMIUM OILFIELD TECHNOLOGIES
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of PREMIUM OILFIELD TECHNOLOGIES in 1225 S. FAUDREE ROAD, ODESSA, TX 79766 (NAICS 333132). OSHA activity number 344350897.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PREMIUM OILFIELD TECHNOLOGIES
- Site address
- 1225 S. FAUDREE ROAD
- City
- ODESSA
- State
- TX
- ZIP
- 79766
- Mailing
- 5727 BRITTMOORE RD., HOUSTON, TX 77041
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333132
- Employees
- 31
- Ownership type
- A
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 28, 2020
- Abate by
- Mar 25, 2020
- Penalty
- Initial $10,409 · Current $6,000 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees On or about September 30, 2019 employees working with pneumatic tools are exposed to struck by hazards while using PVC pipe to transport compressed air.
Recent events (2)
- — I (S) $6000
- — Z (S) $10409
1910.28 B01 I
- Issued
- Feb 28, 2020
- Abate by
- Mar 25, 2020
- Penalty
- Initial $8,675 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that was 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the following: Guardrail systems, safety net systems, or personal fall arrest systems: On September 30, 2019 employees working in the shop attempting to repair a broken pvc pipe were exposed to unprotected falls greater than 4 feet while standing on an I-beam.
Recent events (2)
- — I (S) $5000
- — Z (S) $8675
1910.178 A04
- Issued
- Feb 28, 2020
- Abate by
- Mar 25, 2020
- Penalty
- Initial $8,675 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: On September 30, 2019 employees working in the shop attempting to repair a broken pvc pipe were exposed to unprotected falls while standing on a modified front end attachment that had been used without the manufacturer's prior written approval.
Recent events (2)
- — I (S) $5000
- — Z (S) $8675
1910.178 L01 I
- Issued
- Feb 28, 2020
- Abate by
- Mar 25, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): On or about September 30, 2019 for employees operating forklifts in the shop the employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.179 J02
- Issued
- Feb 28, 2020
- Abate by
- Mar 25, 2020
- Penalty
- Initial $12,145 · Current $7,000 Reduced
General-duty citation text
29 CFR 1910.179(j)(2): The following items were not be inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections: On September 30, 2019 employees in the shop were exposed to struck-by hazards where frequent daily and monthly inspections were not performed on the overhead crane.
Recent events (2)
- — I (S) $7000
- — Z (S) $12145
1910.333 A01
- Issued
- Feb 28, 2020
- Abate by
- Mar 25, 2020
- Penalty
- Initial $12,145 · Current $7,000 Reduced
General-duty citation text
29 CFR 1910.333(a)(1): Live parts that the employee was exposed to were not de-energized before the work began in or near them. On September 30, 2019 employees working in the shop attempting to repair a broken pvc pipe were exposed to electrical hazards when exposed to live parts.
Recent events (2)
- — I (S) $7000
- — Z (S) $12145
1904.29 B02
- Issued
- Feb 28, 2020
- Abate by
- Mar 25, 2020
- Penalty
- Initial $1,735 · Current $0 Reduced
General-duty citation text
29 CFR 1904.29(b)(2): The employer did not fill out or correctly fill out an OSHA Form 301 or equivalent for each recordable injury or illness. On September 30, 2019 an employee was electrocuted while attempting to repair an airline and the company did not fill out an OSHA Form 301.
Recent events (2)
- — I (O) $0
- — Z (O) $1735
More inspections in this industry (NAICS 333132)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344350897.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.