OSHA Inspection: TRAILER WORLD ACQUISITION COMPANY, L.L.C

Issued

2020-01-10 00:00:00

Abate by

2020-01-21 00:00:00

Penalty

Initial $3978.00 · Current $2387.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):    a)     Atlantic Machine Tools Press Brake, Model HDE150-12, Serial No. 58396.:  On November 14, 2019 and at times prior to, the employer exposed employees to amputation hazards by not ensuring the point of operation was properly guarded for the press brake machine.

Issued

2020-01-10 00:00:00

Abate by

2020-01-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, the identity of the workplace evaluated, the person certifying that the evaluation had been performed, and the date the hazard assessment was done:   a)     Trailer World Acquisition Company, LLC Ozark Location:  On or about November 14, 2019 and at times prior to, employee(s) were not provided a hazard assessment for job tasks that exposed employee(s) to struck by hazards while performing jobs tasks such as welding,  grinding and cutting carbon steel metal.

Issued

2020-01-10 00:00:00

Abate by

2020-01-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible:   a)    Main shop and outside areas:  On or about November 14, 2019 and at times prior to, the employer exposed employees to inhalation hazards from dust during work tasks such as grinding metal while providing employees dust masks for voluntary use and did not provide employees with training on Appendix D of the respiratory protection standard.

Issued

2020-01-10 00:00:00

Abate by

2020-01-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:   a)     Hornet Cutting Systems Plasma Cutter, Model HHD78-ECKP, SN 2769: On or about November 14, 2019 and at time prior to,  the employer exposed employees to mechanical and electrical hazards by not providing a  machine specific procedure to lock out/tag out  the plasma cutter that has multiple energy sources to include 200  240V, Phase, 60 Hz, 20 Amp electric and 95 psi pneumatic.

Issued

2020-01-10 00:00:00

Abate by

2020-01-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(5)(ii)(D): Lockout devices and tagout devices did not indicate the identity of the employee applying the device(s):   a)     Hornet Cutting Systems Plasma Cutter, Model HHD78-ECKP, SN 2769:  On or about November 14, 2019 and at times prior to,  the employer exposed employees to hazards by not ensuring lock(s) used for lock out tag out of equipment had employee identification on them or identified singularly.