Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CAESARSTONE TECHNOLOGIES USA, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of CAESARSTONE TECHNOLOGIES USA, INC. in 1 CAESARSTONE DRIVE, RICHMOND HILL, GA 31324 (NAICS 327991). OSHA activity number 344440995.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Caesarstone Technologies USA, INC. — free Get an email when a new federal OSHA severe-injury report for Caesarstone Technologies USA, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1 CAESARSTONE DRIVE
City
RICHMOND HILL
State
GA
ZIP
31324
Mailing
1 CAESARSTONE DRIVE, RICHMOND HILL, GA 31324
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327991
Employees
163
Ownership type
A

3 citations on file for this inspection.

1910.147 C05 I

Serious Gravity 5 1 instance 7 exposed
Issued
Apr 29, 2020
Penalty
Initial $9,543 · Current $4,250 Reduced
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources:    a). Feed Department, Sand Dump Area - On or about and times prior to November 4, 2019, the employer did not provide isolating device equipment (e.g. locks, tags) for feed operators to isolate and secure a vacuum system's energy source during the installation of a dust collection bag onto the discharge opening of the vacuum system, thus exposing employees to a caught-in hazard.
Recent events (2)
  • — I (S) $4250
  • — Z (S) $9543

1910.147 C04 I

Repeat Gravity 5 1 instance 7 exposed
Issued
Apr 29, 2020
Penalty
Initial $19,085 · Current $11,000 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section.    a). Feed Department, Sand Dump Area - On or about and times prior to November 4, 2019, energy control procedures were not utilized when feed operators installed a dust collection bag onto the discharge opening of a vacuum system, thus exposing employees to a caught-in hazard.     Caesarstone Technologies USA, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.147(c)(4)(i), which was contained in OSHA inspection number 1242869, citation number 1, item number 1 and was affirmed as a final order on January 16, 2018, with respect to a workplace located at 1 Caesarstone Drive, Richmond Hill, GA 31324.
Recent events (2)
  • — I (R) $11000
  • — Z (R) $19085

1910.147 C07 I A

Repeat Gravity 5 1 instance 7 exposed
Issued
Apr 29, 2020
Penalty
Initial $19,085 · Current $11,000 Reduced
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.    a). Feed Department, Sand Dump Area - On or about and times prior to November 4, 2019, feed operators who installed a dust collection bag onto the discharge opening of a vacuum system were not provided training that addressed the applicable energy source, and the methods and means necessary for energy isolation and control, thus exposing employees to a caught-in hazard.    Caesarstone Technologies USA, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.147(c)(7)(i)(A), which was contained in OSHA inspection number 1193116, citation number 1, item number 3b and was affirmed as a final order on May 11, 2017, with respect to a workplace located at 1 Caesarstone Drive, Richmond Hill, GA 31324.
Recent events (2)
  • — I (R) $11000
  • — Z (R) $19085

View Caesarstone Technologies USA, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344440995.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.