Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PREMIER STORAGE CONCEPTS INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of PREMIER STORAGE CONCEPTS INC. in 150 S CHURCH ST SUITE C, ADDISON, IL 60101 (NAICS 337122). OSHA activity number 344929518.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Premier Storage Concepts INC. — free Get an email when a new federal OSHA severe-injury report for Premier Storage Concepts INC. is published. One employer, no account, unsubscribe in one click.
Site address
150 S CHURCH ST SUITE C
City
ADDISON
State
IL
ZIP
60101
Mailing
150 S CHURCH ST SUITE C, ADDISON, IL 60101
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
337122
Employees
16
Ownership type
A

5 citations on file for this inspection.

1910.1030 C01

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 23, 2020
Abate by
Feb 1, 2021
Penalty
Initial $7,422 · Current $3,711 Reduced
29 CFR  1910.1030(c)(1):1030(c)(1)(i): At this establishment, the employer did not establish a written blood borne pathogen exposure program designed to eliminate or minimize employee exposure when treating injuries.  On or about September 4, 2020, employees and management officials received potential occupational exposure to blood and other potentially infectious materials while cleaning droplets and pool(s) of blood following a work related accident involving a hand injury on an Omar Hinge Boring-Inserting Machine/Drill Panel in the Production Shop. The employer did not establish a written bloodborne pathogen exposure control plan to eliminate or minimize employees' exposures to bloodborne hazards.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $3711
  • — Z (S) $7422

1910.1030 F01 I

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 23, 2020
Abate by
Feb 1, 2021
Penalty
Initial $7,422 · Current $3,711 Reduced
29 CFR  1910.1030(f)(1)(i): The employer did not make available the hepatitis B vaccine and vaccination series to all employees who have occupational exposure, and post-exposure evaluation and follow-up to all employees who have had an exposure incident.  On or about September 4, 2020, employees and management officials received potential occupational exposure to blood and other potentially infectious materials while cleaning droplets and pool(s) of blood following a work related accident involving a hand injury on an Omar Hinge Boring-Inserting Machine/Drill Panel in the Production Area. The employer did not ensure that the Hepatitis B vaccine and vaccination series were made available and offered to the employees with occupational exposures to bloodborne hazards.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $3711
  • — Z (S) $7422

1910.1030 G02 I

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 23, 2020
Abate by
Feb 1, 2021
Penalty
Initial $7,422 · Current $3,711 Reduced
29 CFR  1910.1030(g)(2)(i): The employer did not train each employee with occupational exposure in accordance with the requirements of this section. Such training must be provided at no cost to the employee and during working hours. The employer shall institute a training program and ensure employee participation in the program.  On or about September 4, 2020, employees and management officials received potential occupational exposure to blood and other potentially infectious materials while cleaning droplets and pool(s) of blood following a work related accident involving a hand injury on an Omar Hinge Boring-Inserting Machine/Drill Panel in the Production Area. The employer did not ensure employees were trained during his/her initial assignment where an occupation exposure may take place.   Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $3711
  • — Z (S) $7422

1910.212 A03 II

Serious Gravity 10 1 instance 16 exposed
Issued
Nov 23, 2020
Abate by
Dec 31, 2020
Penalty
Initial $20,781 · Current $6,867 Reduced
29 CFR  1910.212(a)(3)(ii): Point(s) of operation guards were not designed and constructed to prevent the operator from having any part of his/ her body in the danger zone during the operating cycle:  On or about September 4, 2020, employees were exposed to amputation hazards and hand injuries while operating an Omal Hinges Boring-Inserting Machine/Panel Drill in the Production Shop and the employer did not install an adequate guard to eliminate amputation hazards near the point of operation.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d)  The Chicago Storage Solutions, Inc dba Closets By Design was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.212(a)(3)(ii), which was contained in OSHA inspection number 1158387, citation number 1, item number 1 and was affirmed as a final order on August 3, 2016, with respect to a workplace located at 850 Ridgeway Unit A, Aurora, IL. 60506.
Recent events (2)
  • — I (S) $6867
  • — Z (R) $20781

1904.29 A

Other-than-serious 1 instance 16 exposed
Issued
Nov 23, 2020
Penalty
Initial $2,969 · Current $0 Reduced
29 CFR 1904.29(a): A Log of all Work-Related Injuries and Illnesses (OSHA Form 300), and/or Summary of Work-Related Injuries and Illnesses, (OSHA Form 300-A), and/or the Injury and Illness Incident Report (OSHA Form 301) or equivalent forms were not kept by the establishment:   On or about September 4, 2020, an employee received broken bones and a nicked artery on the left hand while operating an Omal Hinges Boring-Inserting Machine/Panel Drill in the Production Shop, which resulted in days away from work and the employer did not maintain an adequate  OSHA 300 Log for the calendar year of 2020 of any and all recordable work-related injuries and illnesses.   There is no abatement certification or documentation required for this item.  The Chicago Storage Solutions, Inc dba Closets By Design was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1904.29(a), which was contained in OSHA inspection number 1158387, citation number 2, item number 1 and was affirmed as a final order on August 3, 2016, with respect to a workplace located at 850 Ridgeway Unit A, Aurora, IL. 60506.
Recent events (2)
  • — I (O) $0
  • — Z (R) $2969

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344929518.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.