OSHA Inspection: LLEBROC INDUSTRIES, LLC

Issued

2022-09-28 00:00:00

Penalty

Initial $7458.00 · Current $4475.00 Reduced

General-duty citation text

29 CFR  1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:  On or about May 12, 2022, and at times prior thereto, at the Helm Chair Assembly Line, the eye wash station was not immediate accessible for emergency use when employees were exposed to corrosive materials.

Issued

2022-09-28 00:00:00

Penalty

Initial $7458.00 · Current $4475.00 Reduced

Hazardous substances 1730A110Z103

General-duty citation text

29 CFR  1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   On or about May 12, 2022, and at times prior thereto, at the helm chair assembly line, the employer did not provide with effective hazard communication training to employees that worked with hazardous chemicals, exposing employee(s) to chemical hazard(s).

Issued

2022-09-28 00:00:00

Penalty

Initial $1865.00 · Current $1119.00 Reduced

General-duty citation text

29 CFR 1904.41(a)(2): Annual electronic submission of OSHA Form 300A Summary of Work-Related Injuries and Illnesses by establishments with 20 or more employees but fewer than 250 employees in designated industries. If your establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form.  On or about May 12, 2022, and at times prior thereto, at 3601 Conway Street, Fort Worth, TX 76111, the employer did not electronically submit information from OSHA Form 300A Summary of Work-Related injuries and Illnesses to OSHA via the Injury Tracking Application by March 2nd, 2022. The establishment employed 140 employees and is classified 336360 during calendar year 2021.

Issued

2022-09-28 00:00:00

Penalty

Initial $1047.00 · Current $628.00 Reduced

General-duty citation text

29 CFR  1910.37(b)(5): Each doorway or passage along an exit access that could be mistaken for an exit was not marked "Not an Exit" or similar designation, or be identified by a sign indicating its actual use (e.g. closet):  On or about May 12, 2022, and at times prior thereto, the employer did not ensure each doorway or passage along an exit access that could mistake for an exit was marked as "Not an Exit" when:  a. at the CNC Plastic Sheet Milling, the employer marked a bay door with an exit sign which accesses an outdoor area enclosed by a fence that does not lead directly outside, exposing employees to fire and entrapment hazards.  b. at the Helm Chair Assembly Line, the employer did not mark a door used for storage as "not an exit, exposing employees to fire and entrapment hazards.

Issued

2022-09-28 00:00:00

Penalty

Initial $1047.00 · Current $628.00 Reduced

General-duty citation text

29 CFR  1910.303(b)(2):Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  On or about May 12, 2022, and at times prior thereto, at the plastic shipping area, relocatable power tap was connected in series (daisy chained) to an extension cord to power devices (e.g.,  computer, fan, speaker), exposing employee(s) to electrical hazard(s).

Issued

2022-09-28 00:00:00

Penalty

Initial $1047.00 · Current $628.00 Reduced

General-duty citation text

29 CFR  1910.305(b)(2)(i):Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose:  On or about May 12, 2022, and at times prior thereto, covers of the junction boxes were not provide:  a. At the Plastic Trimming Area, cover of the junction box was missing, exposing employee(s) to shock/burn hazard(s).  b. At the Production Area, cover of the junction box was missing, exposing employee(s) to shock/burn hazard(s).

Issued

2022-09-28 00:00:00

Penalty

Initial $1047.00 · Current $628.00 Reduced

General-duty citation text

29 CFR  1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws:  On or about May 12, 2022, and at times prior thereto, at the Custom Parts Assembly Line, the employer did not ensure the power cord of a fan was protected from strain relief, exposing employee(s) to electrical hazard(s