CENTER OSSIPEE, NH —
OSHA Inspection: DRO CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DRO CORPORATION in 30 NEW HAMPSHIRE ROUTE 16B, CENTER OSSIPEE, NH 03814 (NAICS 321918). OSHA activity number 346065170.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DRO CORPORATION
- Site address
- 30 NEW HAMPSHIRE ROUTE 16B
- City
- CENTER OSSIPEE
- State
- NH
- ZIP
- 03814
- Mailing
- 30 NEW HAMPSHIRE 16B, CENTER OSSIPEE, NH 03814
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.213 N01
- Issued
- Sep 27, 2022
- Penalty
- Initial $3,108 · Current $1,550 Reduced
General-duty citation text
29 CFR 1910.213(n)(1): Metal guard(s) covering the cutting head(s), and saw(s) if used, were not provided on each planing, molding, sticking or matching machine. Wood Shop, Smithway XL Moldmatcher, serial number 1064, - On or about July 7, 2022, the molding machine was not provided with a guard covering the cutting head where it had been removed from the machine.
Recent events (2)
- — I (S) $1550
- — Z (S) $3108
1910.213 N03
- Issued
- Sep 27, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(n)(3): Hood(s) or suitable guard(s) were not provided to prevent the hands of the operator from coming in contact with the in running rolls of feed rolls on molding machines. Wood Shop, Smithway XL Moldmatcher, serial number 1064, - On or about July 7, 2022, the molding machine was not provided with a guard covering the in running feed rolls where it was missing from the machine.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 A09
- Issued
- Sep 27, 2022
- Penalty
- Initial $3,108 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(a)(9): All belts, pulleys, gears, shafts, and moving parts were not guarded in accordance with the specific requirements of 1910.219: Wood Shop, Levi Houston Tenoner, serial number 5110 - On or about July 7, 2022, the tenoning machine was not provided with a guard that covered the drive belt and pulleys on the left side of the machine, leaving them completely exposed to the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $3108
1910.213 B01
- Issued
- Sep 27, 2022
- Abate by
- Oct 7, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(b)(1):Woodworking machine(s) were not provided with mechanical or electrical power controls so located that the operator could cut off the power from the machine without leaving his position at the point of operation. Wood Shop, Levi Houston Tenoner, serial number 5110 - On or about July 7, 2022, the power controls for the tenoner machine were mounted on the wall behind the machine where the operator had to leave the point of operation to reach them.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.213 F01
- Issued
- Sep 27, 2022
- Abate by
- Oct 7, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(f)(1): Feed rolls and saws on self-feed circular saw(s) were not protected by a hood or guard to prevent the hands of the operator from coming in contact with the in-running rolls. Wood Shop - On or about July 7, 2022, the feed rollers and saw blade on the self-feed rip saw did not have a guard installed to prevent accidental contact with the saw blade or exposure to the in running nip point of the feed rollers.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 321918)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346065170.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.