1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: ERNST METAL TECHNOLOGIES LLC

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of ERNST METAL TECHNOLOGIES LLC in 2920 KREITZER ROAD, MORAINE, OH 45439 (NAICS 333514). OSHA activity number 346321607.

Watch Ernst Metal Technologies LLC — free Get an email when a new federal OSHA severe-injury report for Ernst Metal Technologies LLC is published. One employer, no account, unsubscribe in one click.
Site address
2920 KREITZER ROAD
City
MORAINE
State
OH
ZIP
45439
Mailing
2920 KREITZER ROAD, MORAINE, OH 45439
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333514
Employees
110
Ownership type
A

3 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $15469.00 · Current $15200.00 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that they were exposed to struck-by and crushed-under hazards of tipping and falling steel coils:   a) On or about 11/3/2022, employees were using a Sortman 6-ton overhead crane to handle coils before placement onto the Fecker decoiler's mandrel. Employees were exposed to tipping and falling coil's struck-by and crushed-under hazards likely to result in serious injury during removal of wooden pallets from the free-standing coils after they were raised into the vertical position and disconnected from the rigging.
Recent events (2)
  • — I (S) $15200
  • — Z (S) $15469

1910.179 N02 II

Deleted Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $15469.00 · Current $0.00 Reduced
29 CFR  1910.179(n)(2)(ii):The load shall be attached to the load block hook by means of slings or other approved devices.  a) On or before  11/3/2022 the employer did not ensure that employees loading steel coils (weighing approx. 2500 lbs.) onto the Fecker decoiler 's mandrel (Auftr. Nr. 07237), utilizing a Sortman 6 ton overhead crane (model # SX50410063P56FL0F), were protected from struck by hazards due to the lifting chains being unattached to the steel coils prior to attaching the coils to the mandrel.
Recent events (2)
  • — I (S) $0
  • — Z (S) $15469

1910.184 C07

Other-than-serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $11050.00 · Current $0.00 Reduced
29 CFR  1910.184(c)(7):Slings shall be padded or protected from the sharp edges of their loads.  a) On or before 11/3/2022 the employer did not ensure that lifting chains being utilized to move steel coils (weighing over 5000 lbs.) were protected from the sharp edges of the steel coils while in the lifting process.
Recent events (2)
  • — I (O) $0
  • — Z (S) $11050

View ERNST METAL TECHNOLOGIES LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346321607.